INSTRUCTION
MANUAL
3D-DNR DAY/NIGHT
MINIATURE COLOR CAMERA
MODEL HDC041
Copyright © 2009 Clover Electronics U.S.A. All Rights Reserved.
Note:
▪ Apply DC12V 250 mA regulated power supply (not included).
▪ To avoid fire or shock hazard, use a UL listed power supply.
TROUBLE SHOOTING
If the camera does not function properly, check the following points before contacting the
service center.
Troubles
Remedies
No video
Check the AC adapter and video cable
between the camera and a monitor
Check the brightness control on the
monitor
Check if the lens is stained. If dirty,
clean it with soft and clean cloth
The image on the screen is dark
The image on the screen is dim
The camera is not working properly, and Check if you have connected the
the surface of the camera case is hot
The contrast on the screen is too weak
provided AC adapter
Adjust the contrast feature of the
monitor. If the camera is exposed under
too strong light, change the position
Does the camera face to directly to the
sunlight or fluorescent light? Change the
camera position
The image on the screen flickers
Picture rolls and jumps, scrambled
picture
Improper V-hold control. Setting on your
monitor
Picture smaller than screen
House current may be too low
SPECIFICATIONS
• Image sensor
• Total pixels
• Effective Pixels
• Scanning system
• O.S.D
• Backlight
• Resolution
1/3” SONY Super HAD CCD
811(H) x 508(V)
768(H) x 494(V)
2:1 Interlace
Available
Off / HSBLC / BLC selectable
550TV Lines(color),600TV Lines(B/W)
52dB (AGC Off, Weight On)
• S/N (Y signal)
• Min.illumination
• White Balance
• Sense-up
• 3 DNR
• D-WDR
• D&N selection
• Digital zoom
• Voltage
0.00001Lux(sense-up x258)
ATW / AWB / Manual / AWC→SET
Off / Auto / (Selectable limit x2 ~ x258)
Off / On (1~50 level adjustable)
Indoor / Outdoor / Off
Color / BW / Auto
On(x32) / Off
DC12V
• Current consumption
• Lens
130 mA @DC12V
3.6mm fixed board lens
• Operating temperature/Humidity
• Storage temperature/Humidity
• Dimensions
-10°C ~ +50°C. RH 95% Max.
-20°C ~ +60°C. RH 95% Max.
34 (W) x 34 (H) x 30 (D) mm
60g
• Weight
LIMITED 2 YEAR WARRANTY
This warranty gives the original purchaser specific legal rights and you may also have
other rights, which vary from state to state. If our products do not function because of any
defect in material or workmanship, we will repair free of charges for 2 years on parts and
labor from the date of original purchase. This warranty does not cover modification,
abuse, incidental or consequential damages unless the state of owner’s residence specially
prohibits limitations on incidental or consequential damages.
HOW TO OBTAIN FACTORY SERVICE
1. Original purchaser must fill out a warranty card and mail it to the factory with model
number, serial number and the date of purchase.
2. We will repair or replace, and return to the owner the system under this limited
warranty.
3. Please pack the system carefully and securely using the original packing materials,
and send it prepaid and insured to: 13073 E. 166th St, Cerritos, CA 90703.
4. Please include a check for $15.00 to cover the cost of return postage and handling. If
the system is returned within the warranty period, please include a proof of purchase.
If the system is out of warranty, you will receive an estimate of the repair cost for
your approval before repair work will be begun.
AVAILABLE ACCESSORIES
CDR0460
CDR4450
CDR0860
CDR1660
CDR0850
CDR1650
CA100BP
ADT120250
Stand-alone 4 CH Digital Video Recorder (DVR).
Stand-alone 4 CH Digital Video Recorder (DVR).
Stand-alone 8 CH Digital Video Recorder (DVR).
Stand-alone 16 CH Digital Video Recorder (DVR).
Stand-alone 8 CH Digital Video Recorder (DVR).
Stand-alone 16 CH Digital Video Recorder (DVR).
100’ BNC/Power to BNC/Power Extension cable and coupler
AC Power Supply DC12V 250 mA Regulated
PACKAGE INCLUDES
1-Day & Night Miniature Color Camera
1-Hardware Accessories Kit
1-Instruction Manual
1-Instruction Manual for OSD Control
1-Warranty Registration Card
|