VICTOR SERIES ALUMINUM WATER PUMPS
For 1965-68 289 c.i.d., 1968-69 302 c.i.d. and 1969 351-W Ford V8s
Catalog #8841 (unpolished), #8846 (polished)
GENERAL INSTRUCTIONS
PLEASE study these instructions carefully before installing
• INSTALLATION
your new water pump. If you have any questions or problems,
do not hesitate to contact our Technical Hotline at:
1-800-416-8628.
Installation is the same as for original equipment water pumps.
Consult service manual for specific procedures, if necessary.
CAUTION: Be sure that fan bolts don't protrude through the
hub so far that they hit the water pump housing.
• NOTE: Check clearance between water pump body and
crankshaft dampner. Clearance pump body or change dampner
if necessary.
• DESCRIPTION
The Edelbrock aluminum water pump #8841 is a heavy duty
water pump for both street and racing applications. The pump is
a direct replacement for the original equipment pump (Ford
#C5AZ-8501-H) to provide compatibility with all accessories
and pulleys. It offers weight savings along with increased dura-
bility and cooling potential. #8841 is a standard rotation water
pump for 289, 302 and 351-W engines. Not for reverse rotation
1986-93 5.0 Litre V8s with serpentine drive belt.
Polished Aluminum Water Pump #8846 fits the same applica-
tions as #8841.
• SPECIAL NOTES:
Check closely for any interference with drive belts; some filing
for clearance may be necessary with some applications.
• SPECIFICATIONS
Dimension from flange surface to hub:
#8841—
5.4"
• PLEASE complete and mail your warranty card. Be sure to write the model number of this product in the “Part #____” space.
• THANK YOU.
©1994 Edelbrock Corp.
11/94
VICTOR SERIES ALUMINUM WATER PUMPS
For 1965-68 289 c.i.d., 1968-69 302 c.i.d. and 1969 351-W Ford V8s
Catalog #8841 (unpolished), #8846 (polished)
GENERAL INSTRUCTIONS
PLEASE study these instructions carefully before installing
• INSTALLATION
your new water pump. If you have any questions or problems,
do not hesitate to contact our Technical Hotline at:
1-800-416-8628.
Installation is the same as for original equipment water pumps.
Consult service manual for specific procedures, if necessary.
CAUTION: Be sure that fan bolts don't protrude through the
hub so far that they hit the water pump housing.
• NOTE: Check clearance between water pump body and
crankshaft dampner. Clearance pump body or change dampner
if necessary.
• DESCRIPTION
The Edelbrock aluminum water pump #8841 is a heavy duty
water pump for both street and racing applications. The pump is
a direct replacement for the original equipment pump (Ford
#C5AZ-8501-H) to provide compatibility with all accessories
and pulleys. It offers weight savings along with increased dura-
bility and cooling potential. #8841 is a standard rotation water
pump for 289, 302 and 351-W engines. Not for reverse rotation
1986-93 5.0 Litre V8s with serpentine drive belt.
Polished Aluminum Water Pump #8846 fits the same applica-
tions as #8841.
• SPECIAL NOTES:
Check closely for any interference with drive belts; some filing
for clearance may be necessary with some applications.
• SPECIFICATIONS
Dimension from flange surface to hub:
#8841—
5.4"
• PLEASE complete and mail your warranty card. Be sure to write the model number of this product in the “Part #____” space.
• THANK YOU.
©1994 Edelbrock Corp.
11/94
|