MS-450Ci
Please read these instructions before use.
Do not discard: keep for future reference.
fellowes.com
JAM PROOF SYSTEM OPERATION*
Eliminates frustrating jams by preventing overloads and powering through misfed paper.
Advanced Jam Prevention- Electronically
measures paper thickness to prevent paper jams:
1
2
3
Up to RED: Too Many
Remove several sheets until
sheets have been inserted.
indicator is below red.
Continue 100% Jam
Proof Shredding
Up to YELLOW: Productivity
is optimized.
Up to GREEN: More sheets
can be added.
If
illuminates after paper has been
If a misfeed
occurs:
All indicators light up and
shredder pauses for 3 seconds
Wait for flashing to stop after automatic correction
is complete. Regular shredding will resume.
reversed, press reverse and remove paper.
Otherwise, regular shredding will resume.
AUTO
*100% Jam Proof when used in accordance with user manual
SAFESENSE® TECHNOLOGY OPERATION
OILING SHREddER
SET-UP ANd TESTING
FOLLOW OILING PROCEdURE BELOW ANd REPEAT TWICE
1
3
3
2
3
1
2
M
M
S
S
-
4
-
4
6
6
0
0
C
C
i
i
6
0
C
i
1
1
12
12
AU
TO
T
AU
TO
®
Press and hold forward
Turn the shredder ON
) to activate SafeSense
Touch test area and
look for the SafeSense
indicator to illuminate
SafeSense is active and
working properly
*Apply oil across
entry and press
Shred one sheet
®
®
(
(
) 2-3 seconds
forward (
)
PREvENTIvE MAINTENANCE ANd MISCELLANEOUS TROUBLESHOOTING
*
• For peak performance, we recommend oiling microshred shredders each time the waste bin is emptied. Only use a non-aerosol vegetable oil (Fellowes 35250).
Machines not oiled may lose sheet capacity, become noisy, and ultimately stop running.
• Though paper detection sensors are designed to be maintenance free, the sensors occasionally become blocked by paper dust, causing the motor to run even
if there is no paper present. (Both paper detection sensors are located in the center of the paper entry).
• Once a day run shredder in reverse for 15 seconds to clear cutters.
• Empty wastebasket when bin full indicator lights up (bag # 36052).
• Shredder won’t run if the waste bin is not pushed all the way in, or bin needs to be emptied.
• When shredding for a prolonged period of time, the motor can become warm and require a cool down period. When this occurs, the overheat indicator will alert you to the
problem, this model will require 25 minutes to cool down.
3
WARRANTY
LIMITED WARRANTY Fellowes, Inc. (“Fellowes”) warrants the cutting blades of the machine to be free IS HEREBY LIMITED IN DURATION TO THE APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE.
from defects in material and workmanship for 5 years from the date of purchase by the original In no event shall Fellowes be liable for any consequential or incidental damages attributable to
consumer. Fellowes warrants all other parts of the machine to be free of defects in material and this product.
workmanship for 1 year from the date of purchase by the original consumer. If any part is found to
This warranty gives you specific legal rights. The duration, terms, and conditions of this warranty
be defective during the warranty period, your sole and exclusive remedy will be repair or replacement,
are valid worldwide, except where different limitations, restrictions, or conditions may be required
at Fellowes’ option and expense, of the defective part.
by local law.
This warranty does not apply in cases of abuse, mishandling, or unauthorized repair. ANY IMPLIED
For more details or to obtain service under this warranty, please contact us or your dealer.
WARRANTY, INCLUDING THAT OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
Help Line
Australia
Canada
Europe
00-800-1810-1810
+1-800-234-1185
+1-800-955-0959
+1-800-33-11-77
+1-800-665-4339
Mexico
United States
1789 Norwood Avenue, Itasca, Illinois 60143-1095 • USA • 630-893-1600
Australia
Benelux
Canada
China
Deutschland
España
France
Italia
Japan
Koreva
Polska
Singapore
United Kingdom
United States
2008 Fellowes, Inc. Part No. 403670
|