®
Stealthbox
I N S T A L L A T I O N G U I D E
START
HERE
for the
SB-F-TRKEXT/8W1
(1997-1999 F-150 SuperCab)
➔
➔
STEP 1: Flip the rear seat up, this will expose
the metal plate that needs to be removed.
STEP 2: Remove the two bolts that secure
the panel to the rear of the cab, with a 18mm
socket.
With aT-30 socket, remove the 8 factory
bolts.
This Stealthbox is a product which
requires professional installation skills and
tools.
Please read this installation guide thor-
oughly before beginning the project. It
will guide you step by step through the
installation. Several of the steps in this
process may require two people to
accomplish.
➔
➔
It is absolutely vital that the enclosure
be properly mounted to the vehicle
according to these instructions. Failure
to mount the enclosure properly pres-
ents two problems: 1)The sub-bass
performance will suffer due to the
movement of the enclosure caused by
the force exerted by the woofer(s) and
2) A loose enclosure presents a serious
safety hazard in the event of a collision
or sudden deceleration.
STEP 4: Run speaker wire to the enclosure loca-
tion. At this time, check the woofers for proper
operation.
STEP 3: With all the mounting bolts
removed, remove the rear seat.
Attach the speaker wire to the enclosure terminal
Place the enclosure on the rear passenger’s side rear
floor.
Please enjoy your JL Audio Stealthbox
responsibly.
Continued on Next Page ➔
SB-F-TRKEXT/8W1, JL AUDIO, Inc 2004
Page 1
Sheet SKU#011112 Revision 8/3/2004
|