MiniCam™ Pro
User’s Manual
HO98756
For technical support contact Jasco Products at 1-800-654-8483
Cautions
Read Before Using Your MiniCam™ Pro
1.
You must install the camera driver BEFORE connecting the camera
to your computer.
2.
3.
Please read this user’s manual before operating your MiniCam™ Pro.
Do not leave camera connected to the USB if camera is not going to
be used for a long period of time. This can adversely affect the
picture quality.
System Requirements
1.
Operating System
a. Microsoft® Windows® 98 SE
b. Microsoft® Windows® ME
c. Microsoft® Windows® 2000
d. Microsoft® Windows® XP
CD drive
2.
3.
USB port
Maintenance Care and Storage
Page 3
1.
Do not use or store the camera in high humidity and extreme
high/low temperature.
2.
3.
4.
5.
Do not touch the lens with your fingers.
Do not drop the camera or get the camera wet.
Do not try to repair the camera.
To clean the camera, use a dry cloth. Do not use organic solvents,
such as alcohol etc. to clean the camera.
Store the camera in a dry and clean place
6.
Page 4
Contents
1.
2.
3.
MiniCam™ Pro with stand and clip
CD with driver and software application
Instruction manual
Getting to Know Your MiniCam™ Pro
Note: You must install the camera driver BEFORE connecting the
camera to your computer.
Page 5
Installation
Please note that you must install the camera drivers BEFORE
you connect the camera to the USB port of your computer.
1.
You must install all relevant updates, service packs, and patches for
your operating system. These are available on Microsoft’s® website
under “Resources”. Use the “Windows Update” link.
2.
3.
Insert the included 98756 MiniCam™ Pro CD into the CD Rom
Drive. (The CD should auto load).
If CD does not auto load, follow these steps:
a. Double click on My Computer
b. Double click on the CD icon on the CD drive
c. Double click on setup.exe
4.
The installation menu will come up. Select MiniCam™ Pro 98756
Driver.
Page 6
5.
6.
Select Next on the Welcome screen.
Under Setup Type select Complete, and then Next to continue.
7.
8.
Select Install to begin copying the driver files to your computer.
On the final screen, select Finish.
9.
It may be necessary to have your Windows installation disk available
to install any additional windows drivers onto your computer. You
will receive a prompt if this is necessary.
10. (Optional) On the installation menu, select ArcSoft Software Suite.
Follow the on screen instructions to install ArcSoft
VideoImpression™ and/or ArcSoft PhotoImpression™. DirectX®
may install as well. Please follow the instructions to complete the
installation. You may need to reboot your computer.
11. (Optional) Select User’s Manauls to open a PDF version of the
98756 Instruction Manual in both English and Spanish. You will
need Adobe Reader to open the user’s manuals.
Page 7
12. (Optional) To download Adobe® Reader® select Adobe Reader 7.0
and follow the instruction instructions. You may need to reboot your
computer.
13. When you have installed the driver, and all of the optional software
you want to install, select Exit.
14. Remove the warning label from the USB plug of your MiniCam™
Pro.
15. After your computer reboots, plug your MiniCam™ Pro’s USB plug
into the USB plug of your computer.
16. Open ArcSoft VideoImpression™ or ArcSoft PhotoImpresssion™
and follow the instructions below to begin using your MiniCam™
Pro camera. Enjoy!
Page 8
PhotoImpression™
Welcome to PhotoImpression
ArcSoft PhotoImpression™ is an easy-to-use image-editing program
specifically designed for general consumers. The program enables you to
edit, retouch, enhance or add special effects to digital images with point-
and-click simplicity. It also offers a great variety of project templates for
creating greeting cards and calendars, plus the functionalities of the
popular Arcsoft PhotoPrinter® and Funhouse™ programs.
ArcSoft PhotoImpression™ is an all-inclusive application designed
specifically for novice users. It combines photo editing with additional
creative and printing tools that maximize your digital imaging experience.
Page 9
Features include:
•
•
•
•
•
•
•
•
•
Create dynamic images
Editable text
Instantly remove red-eye
Special effects and enhancements/Intuitive resize options
Photo fun
Choose from a wide variety of frames, brush stroke edges and shapes
Multiple, advanced printing options--now with PIM!
Desktop interaction
Works great with digital cameras and scanners
To Open ArcSoft PhotoImpression™
1.
2.
Double click on the ArcSoft PhotoImpression™ icon on the desktop.
You may also go to ArcSoft under Programs in the Start Menu, and
click on Photo Impression.
Page 10
Using Photo Impression
1.Click on “Camera/Scanner”. See picture below.
2. Select “GE 98756 MiniCamPro”.
3.The new window will allow you to capture your pictures.
Page 11
Edit Captured Pictures
1.
After you have captured pictures, you’re ready to edit them. To get
started select a picture from the ones you captured.
Your picture will open in the main window. See Diagram.
Click on the Enhance, Create, Project, Save or Print button on the left.
See Diagram.
The associated menus are located on the bottom of the screen. Scroll
through those to find what you need. See Diagram. Have fun!
2.
3.
4.
Note: Captured photos are stored in the “My Pictures” folder in My
Documents by default.
If you need more help, click on “Help” in the upper left-hand corner of the
screen.
patches, free card and calendar templates and other fun stuff.
Page 12
Video Impression™
ArcSoft Video Impression™ is a powerful, easy-to-use video editing and
presentation program designed for consumers. ArcSoft Video
Impression™ enables you to
edit video clips and still images, and to combine them to create multimedia
desktop video presentations for home, business, and the Internet.
ArcSoft Video Impression™ is your ticket to cool home movies and slide
shows. If you know how to drag-and-drop with your mouse, you're all set!
In no time you can combine still images, video clips, audio tracks, text,
Page 13
and special effects into your very own movie. Make a VCD and play your
movie on your DVD player!
Working with Video Impression
•
•
•
•
•
•
•
•
Getting Started
Working with Albums
Working with the Storyboard
Editing Images
Editing Video
Editing Audio
Printing a Still Image from a Video
Saving a Movie
ArcSoft Video Impression™ - Getting Started
1.
Open ArcSoft Video Impression™
A) Double click on the Video Impression icon on your desktop.
B) You may also go to ArcSoft under Programs in the Start Menu,
and click on Video Impression
2.
3.
4.
Click on “Create a New Video.”
Click on the icon: “Capture From Device.”
You should be viewing live video now. If not click on the eye icon to
start viewing live video.
5.
6.
7.
When you’re ready to record, click the record button ( ).
Use the pause button (ꢀ) to stop recording.
The play button (ꢁ) will play back your video.
Page 14
8.
If you want to save what you have recorded, click the album icon to
the right of “Album”.
If you need more help, click on “Help” in the upper left-hand corner of the
screen.
Note: If you are trying to send a video clip by email, your email provider
may have a size limitation.
patches, templates and other fun stuff.
Page 15
MSN® Messenger
Installing/Opening MSN® Messenger
A. Windows® 98/ME/2000
•
•
After it has downloaded, you can open MSN® Messenger by
going to Start → Programs → Windows Messenger.
B. Windows® XP
•
•
MSN® Messenger is already installed
Open MSN® Messenger by going to Start → Programs →
Windows Messenger.
Using MSN® Messenger with your camera
1.
2.
3.
4.
Make sure the MiniCam™ Pro driver has been installed.
Plug the camera into any USB port on your computer.
Open MSN® Messenger using the instructions above.
To start a video conference
a.
b.
In Windows® 98/ME/2000 click on NetMeeting.
In Windows® XP click on Actions → Start a Video
Conversation.
Page 16
Note1: In order to chat and share video with a friend, you will need to add
your friend to your contact list. Your friend will also need to use MSN®
Messenger. This can be downloaded for free from:
Note 2: Windows® XP users may be asked to add a .NET Passport to your
user account. Follow the instructions.
If you need more help, click on ”Help” in the upper right-hand corner of
the screen.
assistance
Page 17
Trouble Shooting
1.
Camera will not turn on
•
Make sure the camera is plugged into the USB port correctly
Make sure your USB port is functioning properly. You may
need to install updates, service packs, or patches for your
operating system from Microsoft’s® website,
www.microsoft.com. Go to “Windows Update” under
Resources.
•
2.
Uninstall the MiniCam™ Pro driver
ꢀ
ꢀ
Close all open applications.
Go to the Start Menu → (Settings in some operating systems)
→ Control Panel → Add/Remove Programs
Select “98756 MiniCamPro”
ꢀ
ꢀ
ꢀ
ꢀ
Select “Remove”, then “OK” to uninstall the driver.
Select “Yes, I want to restart my computer”, then “Finish”.
Your computer will now reboot.
3.
“Can’t detect camera”, “Can’t find VFW driver”, or “Can’t find
camera driver” errors
ꢀ
ꢀ
ꢀ
Close all open applications.
Unplug the MiniCam™ Pro from your computer.
Uninstall the MiniCam™ Pro software according to the
Page 18
directions above, then reboot your computer.
Re-install the MiniCam™ Pro driver according to the
installation directions, then reboot your computer.
Plug in your MiniCam™ Pro.
ꢀ
ꢀ
4.
5.
Problems with Photo Impression™ or Video Impression™
Visit http://www.arcsoft.com
Problems with MSN™ Messenger
Visit http://messenger.msn.com
•
•
**Microsoft and Arcsoft may update their software at any time.
Page 19
TWO YEAR LIMITED WARRANTY
Jasco Products Company warrants this product to be free from
manufacturing defects for a period of two years from the original date of
consumer purchase. This warranty is limited to the repair or replacement
of this product only and does not extend to consequential or incidental
damage to other products that may be used with this unit. This warranty is
in lieu of all other warranties express or implied. Some states do not allow
limitations on how long an implied warranty lasts or permit the exclusion
or limitation of incidental or consequential damages, so the above
limitations may not apply to you. This warranty gives you specific rights,
and you may also have other rights which vary from state to state. If unit
should prove defective within the warranty period, return prepaid with
dated proof of purchase to:
Jasco Products Company
311 N.W. 122nd
Oklahoma City, OK 73114
Page 20
FCC Statement
Notice: Federal Communications Commission (FCC) requirements,
Part 15
This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Page 21
•
Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes of modifications not expressly approved by the
grantee of this device could void the user's authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Page 22
|