JLFFW2005
frost free fridge freezer
Instruction manual
For the safety of life and property keep the
precautions of these user's instructions as the
manufacturer is not responsible for damages caused
by omission.
WARNING
A cut off plug inserted into a 13-amp socket is a serious
safety (shock) hazard. Please ensure the cut off plug is
disposed of safely.
Maintenance and Cleaning
Before cleaning, always switch off the appliance and
disconnect from the electrical supply.
The symbol
on the product or on its packaging
indicates that this product may not be treated as
household waste.
Check and clean the drain in the refrigerator
compartment for defrosted water regularly;if the drain is
blocked, water will gather in the bottom of the
refrigerator.
When unplugging always pull the plug from the mains
socket, do not pull on the cable.
Instead it should be taken to the appropriate
collection point for the recycling of electrical and
electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent
potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product. For more detailed
information about recycling of this product,
please contact your local council, your household
waste disposal service or the shop where you
purchased the product.
Further information on cleaning is on page 18 of this
manual.
Service
This product should only be serviced by an authorised
engineer and only genuine spare parts should be used.
Under no circumstances should you attempt to repair
the appliance yourself. Repairs carried out by
inexperienced persons may cause injury or serious
malfunction.
Service Force are the authorised repair agents for John
Lewis branded domestic appliances.
Ecological hints
To save energy and help protect the environment, we
recommend that you follow these hints.
Do not install the appliance close to sources of heat such as
a boiler or radiator.
Locate the appliance in a well-ventilated room and make
sure that any air openings of the appliance are not
obstructed.
Pack all foods into airtight packages before placing them into
the freezer compartment.
Food, which is to be frozen (when cool), should be placed in
the fridge compartment before being transferred to the
freezer.
Try to avoid keeping the door open for long periods or
opening the door too frequently as warm air will enter the
cabinet and cause the compressor to switch on
unnecessarily often.
Ensure there are no obstructions preventing the door from
closing properly.
Environmental information
After unpacking please dispose of the packaging with due
regard to safety and the environment.
Materials marked with the symbol
are recyclable.
Avoid damaging the cooling unit, especially at the rear near
the heat exchanger. Check with your local Council or
Environmental Health Office to see if there are facilities in
your area for recycling this appliance.
When the appliance is to be scrapped, cut off the power
supply cable and remove the door,to prevent young children
from being trapped inside.
This appliance does not contain gases, which could damage
the ozone layer, in either, its refrigerant circuit or insulation
materials.
3
Contents
Important safety information
Installation
Description of the appliance
The Control Panel
Display
For the Installer
Installation
For the User
2
2
5
12
12
12
12
12
6
6
7
7
7
7
8
9
11
Technical Specifications
Unpacking
Cleaning
Positioning
Switching the appliance on
Switching the appliance off
Functions Menu
Select /Switch off /Switch on each
compartment
Switch off of one compartment
Ambient Temperature Function
Child lock Function
Climate Classification
Installation of the Carbon Filter
Change of door opening direction
Electrical connection
13
13
13
13
14
14
14
14
14
15
15
15
Using the refrigerator
Drawer
Use of the fridge compartment
Shopping Function
Eco mode Function
Drinks Chill Function
Air Filter
Storing in foods the refrigerator
Storage time and temperature of foods 15
Using the freezer
16
16
16
16
16
16
16
17
17
18
19
19
19
19
19
19
19
20
20
21
22
Use of the freezer compartment
Storage of frozen food
Temperature regulation
Excessive temperature alarm
Door open audible alarm
Freezing fresh food
Guide to the Instruction Manual
The following symbols will be found in the text to guide
you throughout the instructions:
Storing in the freezer
How to make ice cubes
Storage time chart (refrigerator)
Storage time chart (freezer)
Maintenance and Cleaning
Defrosting
Safety precautions
Warnings and information at this symbol serve
safety for you and your appliance.
Regular cleaning
Internal cleaning
External cleaning
Changing the Carbon Filter
Trouble shooting
Hints and tips
Environmental information
This appliance complies with the following
E.E.C. Directives:
73/23 EEC of 19.02.73 (Low Voltage Directive) and
subsequent modifications,
How to change the bulb
Something Not Working
Repairs - After Sales Service
89/336 EEC
Compatibility
modifications.
of
03.05.89
(Electromagnetic
and subsequent
Directive)
4
Description of the appliance
A - Refrigerator
B - Freezer
14. Dairy compartment
15. Egg tray
16. Door shelf
17. Door seal
1. Control panel
2. Air distribution and light box
3. Glass shelves
4. Bottle rack
18. Bottle shelf
19. Handles
5. Glass shelf
6. Fresh Box
20. Ice tray
7. Salad/vegetable drawer
8. Rating Plate
9. Air grid
10. Storing compartment(s)
11. Quick freeze dawer
12. Bottom plinth
13. Adjustable feet
21. Condenser
22. Defrost water outlet tube
23. Spacer
24. Evaporator tray
25. Compressor
26. Rollers
5
Installation
It is dangerous to alter the specifications or attempt
to modify this product in any way.
Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
Technical Specifications
Dimensions
Width
Height
Depth
595 mm
2010 mm
632 mm
230V/50Hz
0,6 A
Power suply voltage
Rated current
Gross capacity
Refrigerator
Freezer
293 l
122 l
Net capacity
Refrigerator
Freezer
240 l
78 l
Freezing capacity
10 kg/24 h
1,12 kWh/24h
409 kWh/year
A
Energy consumption
Energy class, according to EU standards
Rising time
16 h
Noise Lc
42 dB
Weight
77 kg
Number of compressors
1
6
Unpacking
The appliance must always be transported in the
upright position as indicated on the outside of the
packaging.
After each transportation the appliance must not be
switched on for approx.2 hours.to ensure the coolant gases
settle.
Unpack the Fridge Freezer and check for any possible
damage. If the appliance is damaged please report this to the
John Lewis branch from which you purchased; in this case
please retain the packaging.
Cleaning
Levelling
Remove all adhesive tape and ties, which ensure the internal
fittings do not move during transportation.
When placing the appliance ensure that it stands level, to
prevent vibration, excessive noise and to ensure the
doors shut correctly.
Wash the inside of the appliance using lukewarm water and
mild detergent; using a soft cloth.
Further cleaning advice is given on page 19.
Positioning
The appliance should be located in a well ventilated, dry
room.To ensure correct operation the appliance should:
Not be exposed to direct sunlight.
Not be installed next to radiators, cookers or other
sources of heat.
Only be installed in a location where the ambient
temperature corresponds to the climate classification for
which the appliance is designed.
Climate Classification
The climate classification can be found on the rating plate;
which is located on the bottom left hand side of the fridge
compartment, see page 5 .
The table shows the correct operating ambient temperature
for each climate class.
Level the appliance by turning the 2 adjustable feet at the
front of the Fridge Freezer.
When placing the refrigerator keep minimal
distances recommended in figure.
A: placing it under a wall-cupboard
B: placing it freely
Class of climate
Ambient temperature
+10…+32°C
SN
N
+16…+32°C
ST
+18…+38°C
If the temperature rises above or falls below the stated
ambient temperature for the climate class, the operation of
the appliance may be affected.
Ventilation
You should ensure that air can circulate freely around the
back and top of the cabinet. In the Instruction manual bag
there are two spacers which must be fitted to the top rear
corners. This will ensure a gap is maintained between the
Fridge Freezer and the wall.
Loosen the screws and insert the spacer under the screw
head, then re-tighten the screws.
7
Installation of the Carbon
Filter
On delivery the carbon filter is in a plastic bag to
maintain it's duration and characteristics. The filter
should be placed behind the flap before the appliance is
turned on.
1.Pull the flap outwards. (1)
2.Remove the filter from the plastic bag.
3. Insert the filter in the slot found in the back of the flap
cover (2).
4.Close the flap cover.
During operation, always keep the air
ventilation flap closed.
The filter should be handled carefully so
fragments do not loosen from the surface.
8
Reversing the fridge freezer doors
Should it be necessary, to suit the placement of the
appliance in your kitchen, you can reverse the doors.
The appliances is delivered with the door opening to the
right.
Carry out the steps as per the pictures and the instructions.
1. We recommend that you have another person to help
you who can safely hold the doors of the appliance
secure.
2. Disconnect the appliance from the electrical supply.
3. Open the door of the fridge, dismantle the top cover
(j) by removing the 2 screws (a), then close the door
(Fig. 2).
4. Move the panel (g) from one side of the top cover (2)
to the other (Fig. 2).
5. Unscrew the 2 screws (c), remove the door mount
at the top right-hand side (d), and unscrew the screw
on the other side (c), remove the panel (b) and place
in an empty plastic bag (Fig. 1).
fig. 1.
6. Lift the fridge door up slightly and remove.
7. Unscrew the screw (m), remove the door stopper
(h) and attach reversed on the other side (Fig. 2).
8. Remove double door mount (a, b, c) from the body
of the appliance in steps. Please make sure the plastic
spacer (b) under the door mount is also removed
(Fig. 3).
9. Lift the freezer door up slightly and remove.
10. Remove stops in both doors (t, z) (Fig. 5).
11. Lift out the insert for the lower covering grid (e)
using a screw driver (Fig. 4).
12. Unscrew the bottom door retaining pin for the
freezer door (h, f) and then screw in on the other
side. Don't forget the spacer (h) (Fig. 4).
fig . 2.
13. Insert the insert for the lower covering grid (e) on
the other side.
14. Remove the left-hand cover pin of the double door
mount (3 pieces, n, k) and move to the other side
(Fig. 3).
15. Disassemble the door locking elements (u, v) by
unscrewing the screw (s) (Fig. 5).
16. Reverse the door locking elements (u, v), move to
the other side of the other door and fix by screwing
in the screw (s).
17. Re-insert the stoppers (t, z) on the other side of the
doors.
18. Fit the pin of the double door mount (m) into the
left-hand hole of the freezer door (Fig. 3).
fig. 3.
9
19. Place the freezer door on the lower door retaining
pin (f) (Fig. 4).
20. Fix the double door mount with 2 screws (c) on the
left-hand side. Don't forget the plastic spacer under
the door (b) as well.The edges of the doors must run
parallel to the side edge of the appliance.
21. Place the fridge door on the double door retaining
pin.
22. Remove the top left-hand side door mount (f) and
the panel (c) from the plastic bag and attach using the
screws (c) (Fig. 1).
23. Open the fridge door, attach the top cover (j) using
2 screws (a); at the same time pay attention to the
repositioning of the magnet (k), then close the door
(Fig. 2).
fig. 4.
24. Put over the handles (r) on the other side and put the
plastic blanking pins (p) supplied in the plastic bag of
this instruction book into the holes set free. (fig. 6)
25. Put the appliance into position, make adjustments if
not horizontal and connect to the electrical supply.
If you do not want to carry out these steps yourself, please
contact the nearest branded service point. Technicians will
make a charge for door reversal.
fig. 5.
fig. 6.
10
Electrical connection
Any electrical work required to install this appliance should
be carried out by a qualified electrician or competent
person.
WARNING:
A cut off plug inserted into a 13 amp socket
is a serious safety (shock) hazard.
WARNING: THIS APPLIANCE MUST BE
EARTHED.
Ensure that the cut off plug is disposed of
safely.
Should the appliance power supply cable need
to be replaced, this must be carried out by a
Service Force agent (see page 22)
The plug must still be accessible after the
appliance has been installed.
The manufacturer declines any liability should
this safety measure not be observed.
The appliance should not be connected to
the electrical supply by means of an
extension cable
Before switching on, make sure the electricity supply voltage
is the same as that indicated on the appliance’s rating plate.
(See picture on page 5).
The appliance is supplied with a 13amp plug supplied. In the
event of having to change the fuse in the plug supplied, a
13amp ASTA approved BS 1363/A fuse must be used.
Permanent connection
In the case of permanent connection it is necessary that
you install a double pole switch between the appliance
and the electricity supply (mains), with a minimum gap of
3mm between the switch contacts and of a type suitable
for the required load in compliance with the current
electrical regulations.
Should the plug need to be replaced for any reason,proceed
as described below.The wires in the mains lead are coloured
in accordance with the following code:
Green andYellow
Blue
- Earth
- Neutral
- Live
The switch must not break the green and yellow earth
cable at any point.
Brown
If you fit your own plug, the colours of the wires in the
mains lead of your appliance may not correspond with the
markings identifying the terminals in your plug.
Proceed as follows:
1. Connect the Green and Yellow (earth) wire to the
terminal in the plug which is marked with the letter "E"
orthe earth symbol
or coloured green and yellow.
2. Connect the Blue (neutral) wire to the terminal in the
plug which is marked with the letter "N" or coloured black.
3. Connect the Brown (live) wire to the terminal in the
plug which is marked with the letter "L" or coloured red.
4. Upon completion there must be no cut, or stray strands
of wire present and the cord clamp must be secure over the
outer sheath.
11
The Control Panel
A - Appliance button ON/OFF
B - Temperature regulation button
C - Temperature and function display
D - Function button
+5°C in the fridge
-18°C in the freezer
Wait until the inside compartment temperature reach
-18°C, before placing food in the freezer
compartment.
To select a different temperature see "Temperature
regulation".
E - Confirmation button
Display
Important
If the door remains ajar for some minutes, the
internal lighting will turn off electronically; after this, the
lighting function will be reset by closing and opening the
door itself.
if indicates the compartment is on;
Switching the appliance off
if
indicates the temperature of the relevant
The appliance is switched off by pressing key (A) for
more than 1 second. After this, a countdown of the
temperature from -3 -2 -1 will be shown.
compartments
if it flashes the operations corresponds to the relative
compartment
Functions Menu
High temperature alarm and Door open audible alarm
Indicator
By pressing the key D the functions menu is open. Each
function can be selected by pressing button E. If there is
no confirmation after some seconds the display will exit
from the menu and return to normal mode.
indicates the ambient room temperature
Positive or negative Temperature indicator
Temperature indicator
The following functions are available:
If on, the function child lock is on
If on, the function timer is on
Select/Switch off/Switch on fridge compartment
Select/Switch off/Switch on freezer compartment
Ambient Temperature
If on, the shopping function is on
If on, the Chill mode function is on
If on, the quick freeze function is on
If on, the Eco mode function is on
Child lock function
Shopping function
Eco mode function
Switching the appliance on
Quick freeze function
Chill mode function (or timer function)
Once connected to the mains supply, if the display is not
illuminated, press key (A), to switch the appliance on.
As soon as the appliance is turned on, it is in alarm mode,
the temperature flashes and you will hear a buzzer.
Press key (E) and the buzzer will go off (also see the section
on "high temperature alarm") the icon
on the indicator will slow the
warmest temperature reached.
still flashes and
For correct storage of the food select the Eco mode
function that guarantee the following temperatures are
set:
12
Select /Switch off /Switch on
each compartment
Temperature selection
The temperature may be regulated by pressing the key (D)
to select the compartment and then the key (B) to set the
desired temperature.
By pressing the key (B) the current temperature setting
flashes on the indicator. To confirm the choice of
temperature press the key (E).You will hear the buzzer for
few seconds and the indicator displays the newly selected
temperature for a few seconds, then shows again the inside
compartment temperature.
The newly selected-temperature will be reached after 24
hours.
The temperature will remain stored even if the product is
not in use.
Attention!
During the stability period by the first starting the
temperature displayed can not correspond to the setting
temperature. During this time it is possible that the
temperature displayed is different than the setting
temperature.
Switching off one compartment
To switch off one compartment press the key (D) until the
compartment is selected and then press hold of key (A), the
count down will begin.
AmbientTemperature Function
The ambient temperature function is activated by pressing
key D (several times if necessary) until the corresponding
icon appears
.
In this condition the selected temperature is the ambient
temperature.
You must confirm the choice by pressing key E within a few
seconds.You will hear the buzzer and the icon will remain
lit. It is possible to de-activate the function at any time by
pressing key D until the corresponding icon will flash and
then press key E.
Child lock Function
The child lock function is activated by pressing key D
(several times if necessary) until the corresponding icon
appears
.
You must confirm the choice by pressing key E within a few
seconds.You will hear the buzzer and the icon remains lit.
With this function activated, the programmed temperatures
and settings remain, even if any of the keys are pressed.
It is possible to de-activate the function at any time by
pressing key D until the corresponding icon flashes and then
pressing key E.
13
Using the refrigerator
To maintain the selected cooling temperature within
the summer holidays) preventing bad smells forming.
the refrigerator air must be allowed to circulate.
Ensure the air circulation gaps behind the shelves are not
covered.
1.To turn on the holiday function operate as per changing
the selected temperature.The temperature indicator can
change the displayed temperature up to + 8 °C, 1 °C at
a time. + 2 °C will be followed by the letter "H". Press
key E to confirm.
Now the refrigerator is in the "holiday function" in the
energy saving mode.
Always allow hot foods to cool to room
temperature before placing into the
refrigerator. This will avoid a build up of frost.
Foods can transfer or take in odours from
other foods. So it is essential to put foods in
closed dishes or wrap them in cellophane,
aluminium foil, grease-proof paper or cling film
before placing them into the refrigerator.This way
foods will keep their moisture e.g. vegetables will
not dry out after some days.
Attention!
The fridge compartment must be empty with
holiday function on.
Shopping Function
Salad/Vegetable drawer
The drawer is suitable for storing fruit,vegetables and salad.
If you need to place a large amount of warm food in the
fridge, e.g. after doing the grocery shopping, we suggest
activating the Shopping function to chill the products
more rapidly and to avoid warming the other food which
is already in the refrigerator.
There is a separator inside the drawer that can be placed in
different position to accommodate your personal food
requirements.
The shopping function is activated by pressing key D
(several times if necessary) until the corresponding icon
appears
You must confirm the choice by pressing key E within a
few seconds.You will hear the buzzer and the icon will
remain lit.
The shopping function shuts off automatically after
approximately 6 hours.
It is possible to de-activate the function at any time by
pressing key D until the corresponding icon flashes and
then pressing key E.
Eco mode Function
Use of the fridge compartment
Temperature regulation
The Eco mode function is activated by pressing key D
(several times if necessary) until the corresponding icon
The temperature of this compartment can set between
+2°C and +8°C.
appears
.
You must confirm the choice by pressing key E within a
few seconds.You will hear the buzzer and the icon will
remain lit.
During normal operation the indicator shows the
temperature inside the fridge.
In this mode the chosen temperatures are automatically
set (+ 5°C e - 18°C), in the best conditions for storing
food.
It is possible to de-activate the function at any time by
changing the selected temperature in one of the
compartments.
Attention!
Difference between the temperature displayed and
temperature setting is normal. Especially when:
- a new setting has recently been selected
- the door has been left open for a long time
- warm food has been placed in the compartment.
Holiday Function "H"
The holiday function sets the temperature at + 15°C.
This function allows you to keep the refrigerator
shut and empty during a long holiday period ( e. g.
14
Drinks Chill Function
Storing foods the refrigerator
When placing different kinds of foods into the
refrigerator; take note of the correct storage positions
for these foods.
The Drinks Chill function is used for the rapid cooling of the
drinks in the freezer compartment.It is activated by pressing
key D (several times if necessary) until the corresponding
1. Confectionery, ready-cooked foods, foods in
dishes, fresh meat, cold cuts, drinks
icon appears
.
You must confirm the choice by pressing key E within a few
seconds.You will hear the buzzer and the icon remains lit.
In this mode it sets a timer with a default value of 30 min
which can be changed from 1 to 90 min, by pressing key B.
At the end of the selected time there are the following
indications:
2. Milk, dairy products, foods in dishes
3. Fruits, vegetables, salads
4. Cheese, butter
5. Eggs
- on the display the symbol flashes ;
6. Yoghurt, sour cream
7. Small bottles, soft drinks
8. Big bottles, drinks
9. Fresh box
- the icon flashing
- the icon flashing
;
;
- sounding of an acoustic alarm until key E is pressed.
At this point remove the drinks contained in the freezer
compartment.
It is possible to de-activate the function at any time by
pressing key D until the corresponding icon flashes and then
pressing key E
Air Filter
Your appliance is equipped with a carbon filter behind a flap
in the rear wall of the air distribution box.
The filter purifies the air from unwanted odours in the
fridge compartment enhancing the fridge storage quality.
Storage time and
temperature of foods
The food storage time chart in this manual gives
guidelines about food storage times.
It is not possible to be precise, as the food storage time
will depend on the foods freshness and how the food has
been handled through the food chain.
If you do not want to place pre-frozen foods purchased
from the supermarket into the freezer, they can be
stored for about 1 day (until defrosted) in the
refrigerator.
15
Using the freezer
Use of the freezer compartment
High temperature alarm
The freezer has the symbol
which means that it is
suitable for freezing fresh food and for long term storage of
frozen and deep-frozen food.
An increase in the temperature in the freezer
compartment (for example due to a power failure) is
indicated by:
Storage of frozen food
- flashing temperature;
- freezer compartment flashing
;
When first starting-up or after a period out of use, before
putting the food in the compartment let the appliance run
at least 12 hours.To obtain the best performance from this
appliance, you should: if large quantities of food are to be
stored, remove all drawers and baskets from appliance and
place food on cooling shelves.
- flashing of the icon
- sounding of buzzer.
;
When normal conditions are restored:
- the acoustic signal shuts off;
- the temperature value continues to flash;
Pay careful attention not to exceed load limit stated on the
side of the upper section (where applicable).
When you press key "E" to de-activate the alarm, the
highest temperature reached in the compartment
appears on indicator
for some seconds. Then it
Temperature regulation
The temperature may be set between -15°C and -24°C.
returns on the normal operation showing the
temperature of the selected compartment.
We suggest setting the internal temperature of
approximately -18°C, which guarantees proper freezing and
preservation of frozen foods.
During the alarm phase, the buzzer can be switched off
by pressing key E.
Door open audible alarm
Attention!
Following first start up, the temperature displayed
can not correspond to the set temperature. During this
time it is possible that the temperature displayed is different
than the set temperature.
An audible alarm will sound when the door is left open
for around 5 minutes.
The door open alarm conditions are indicated by:
- flashing symbol of the relative compartment
- sounding of buzzer.
Press the key (E) to stop the acoustic alarm.
When the door is closed:
- the acoustic alarm will stop.
Attention!
Difference between the temperature displayed and
temperature set is normal. Especially when:
- a new setting has recently been selected
- the door has been left open for a long time
- warm food has been placed in the compartment
Difference of up to 5°C inside the compartment are quite
normal.
Freezing fresh food
The freezer compartment is suitable for long term
storage of commercially frozen and deep-frozen food,
and for freezing fresh food.
During normal functioning the indicator shows the warmest
temperature inside the compartment.
The maximum quantity of foods to freeze in 24 hours is
shown on the rating plate
To freeze the amount of food indicated on the rating
plate, place the food directly in touch with the cooling
surface (remove the drawer or basket). In case the food
is frozen inside the drawers or baskets, the maximum
quantity is slightly reduced.
Important
In the event of accidental defrosting, for
example due to a power failure, if the power has
been off for longer than the value shown in the
technical characteristics chart under "rising time",
the defrosted food must be consumed quickly or
cooked immediately and then refrozen (after
cooling).
Place the food to be frozen in the
this is the coldest part.
compartment, as
To freeze fresh foods, you will need to activate the quick
freeze function. Press key D (several times if necessary)
until the corresponding icon appears
You must
confirm the choice by pressing key E within few seconds.
You will hear the buzzer and the display will show the
relevant icon.
After a pre-cooling period of 24 hours, place the foods
in the freezer.
16
The freezing process takes 24 hours. During this period do
not put other foods in the freezer.
This function stops automatically after 52 hours.
It is possible to de-activate the function at any time by
pressing key D until the corresponding icon flashes and then
pressing key E.
Storing in the freezer
Once the freezing process has been completed all
compartments can be used for storage but if you require to
freeze further quantities of food move the recently frozen
foods to the upper compartments.
If you are storing large quantities of food you can remove
the top baskets from the freezer and store foods directly on
the shelves. Do not remove the bottom freezing
compartment.
For supermarket pre-frozen foods be aware of the
use by date on the packaging at all times and use the
foods prior to that date.
It is not safe to re-freeze foods that were previously
frozen and have defrosted; you are advised to use the
foods as soon as possible or to cook the foods and then re-
freeze.
How to make ice cubes
To make ice cubes fill the ice cube tray with fresh or filtered
water and place the tray into the frozen food compartment.
Set the thermostat control to maximum to reduce the
freezing time. Re-set the thermostat control to normal
running. To release the ice cubes hold the tray under
running water then twist the tray.
17
Storage time chart (refrigerator)
Time and method of storage of fresh foods in the refrigerator
Foods
Storage time in days
Method of packaging
1
2
3
x
X
X
4
x
x
x
5
x
x
x
6
7
Raw meat
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
cling film, airtight
Cooked meat
Roasted meat
x
dish covered
dish covered
Raw minced meat
Cold cuts,Vienna sausage
Fresh fish
dish covered
X
x
X
X
x
x
x
x
x
x
x
cling film, cellophane, grease-proof paper
cling film, airtight
dish covered
Cooked fish
x
x
Fried fish
x
dish covered
Tinned fish, open
Fresh chicken
Fried chicken
Fresh duck, goose
Roasted duck, goose
Butter unopened
Butter opened
Milk
dish covered
cling film, airtight
dish covered
cling film, airtight
dish covered
original packaging
original packaging
original packaging
plastic box
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
x
X
X
X
X
X
x
X
x
X
x
X
X
x
x
x
X
X
X
x
x
x
x
x
x
x
x
X
X
x
x
X
X
X
X
x
Cream
x
Sour cream
X
X
X
X
X
x
X
x
X
x
x
X
x
x
X
x
X
x
x
X
x
X
x
x
X
plastic box
Cheese (hard)
Cheese (soft)
Curds
aluminium foil
cling film
cling film
Egg
Spinach, sorrel
Green peas, green beans
Mushroom
Carrot, roots
Bell-pepper
cling film
cling film
cling film
cling film
cling film
cling film
cling film
x
x
X
x
X
X
x
x
X
X
Tomato
Cabbage
X
X
X
x
X
x
Soft fruits (strawberries,
raspberries, etc.)
Other fruits
Tinned fruits opened
Cakes filled with cream
X
X
X
X
X
X
X
X
X
X
X
x
x
X
x
x
x
x
cling film
cling film
dish covered
dish covered
x
x
x
Notation:
X usual storage time
x possible storage time (concerns to really fresh product only)
18
Storage time chart (freezer)
Storage time of deep-frozen and frozen products
Foods
In the fresh food
In the **** frozen food
compartment -18°C
compartment +2 - +7°C
Vegetables:
green beans, green peas, mixed vegetables, marrow, corn, etc.
1 day
1 day
1 day
1 day
1 day
1 day
12 months
12 months
6 months
12 months
6 months
12 months
Ready-cooked foods:
vegetable dish, trimmings, with meat, etc.
Ready-cooked foods:
sirloin steaks,
Foods from potatoes, pasta:
mashed potato, gnocchi, dumplings, filled pasta
Soups:
vegetable soup
Fruits:
cherries
Meat:
chicken, duck, goose
fillets, tuna fish
Ice-cream
1 day
1 day
1 day
5 months
6 months
3 weeks
Maintenance and Cleaning
Changing the Carbon Filter
You must disconnect the appliance from the
electricity supply, before you can carry out any
cleaning or maintenance work.
To maintain the best performance the carbon filter
should be changed every year.
New carbon filters can be purchased from your local
dealer.
1. Pull the flap outwards. (1)
Defrosting
Defrosting is automatic in this appliance.
2. Remove the filter from the plastic bag.
3. Insert the filter in the slot found in the back of the flap
cover (2).
Regular cleaning
Disconnect the appliance from the electricity supply, before
you carry out any cleaning or maintenance work.
4. Close the flap cover.
Clean the equipment regularly.
Note: the carbon filter is a consumable accessory and as
such is not covered by the guarantee.
Do not use detergents, abrasive or strongly
odorous cleaners, waxy polishing agents,
disinfectants or alcoholic products for cleaning the
equipment.
During operation, always keep the air
ventilation flap closed.
The filter should be handled carefully so
fragments do not loosen from the surface.
Pull out the wall plug of the equipment from the outlet.
Internal cleaning
Clean the internal parts of the equipment and the
accessories with warm water and Bicarbonate of Soda (5 ml
to 0.5 litre of water).
Rinse and dry everything thoroughly.
Clean the door seal with clean water.
External cleaning
Clean the external parts of the equipment with warm water
and Bicarbonate of Soda (5 ml to 0.5 litre of water).
Dust will build up on the condenser (the black grill at the
back of the appliance) and the reservoir; this can inhibit the
efficiency of the fridge freezer. It is recommended to clean
both on a six monthly basis.
After cleaning, reconnect the equipment to the mains
supply.
19
When the refrigerator is not
in use
If the refrigerator is to be turned off for some time,
follow these steps.
Unplug the appliance.
Remove foods from the refrigerator.
Defrost and clean it as written before.
Defrost and clean as detailed above.
Trouble shooting
How to change the bulb
Should the light fail to work you can change it as below:
Break the circuit of the appliance.
Press the rear hook (1) of the lampcover by a
screwdriver and at the same time pull and rotate the
cover in the direction indicated by the arrow (2). So the
bulb can be replaced. (Bulb type: T25 Daylight Halolux
230-240V, 25 W, E 14 thread)
After changing the bulb replace the cover, snap it in place
and apply voltage to the appliance.
20
Something Not Working
Certain problems are due to a lack of simple maintenance or oversights, which can be solved easily without calling out an
engineer.Please carry out the following checks before contacting the extended warranty administrators see Repairs -After
Sales Service.
IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or
installation, a charge will be made even if the appliance is under guarantee.
Symptom
Cause
Solution
It is too warm in the
refrigerator.
If products are not cold enough or placed
incorrectly.
Place the products to the appropriate place.
The door does not close tightly or it is not
shut properly.
Check if the door closes well and the
gasket is undamaged and clean.
The door does not close tightly or it is not
shut properly.
It is too warm in the
freezer.
Check if the door closes well and the
gasket is undamaged and clean.
Products in big quantity to be frozen were put
in.
Wait some hours and then check the
temperature again.
Products to be frozen are placed too closely to
each other.
Place the products in a way so that cold air
could circulate among them.
The melting water outlet flows not into the
evaporative tray above the compressor.
Put the melting water outlet to the
evaporative tray.
Water flows onto the
floor.
Products are not wrapped properly.
Doors are not shut properly or do not close
tightly.
Wrap the products better.
Check if the doors close well and the
gaskets are undamaged and clean.
There are too much frost
and ice.
The thermostatic control can be set
incorrectly.
Set the thermostat a position that gives
higher temperature.
The compressor operates
continually.
Check if the doors close well and the
gaskets are undamaged and clean.
Wait some hours and then check the
temperature again.
Doors are not shut properly or do not close
tightly.
Products in big quantity to be frozen were put
in.
Put food at max. room temperature.
Too warm food was put in.
The appliance is in too warm place.
Try to reduce the temperature in the room
where the appliance stands.
The appliance does not
work at all. Neither
cooling, nor lighting works.
Plug is not connected to the mains socket
properly.
The fuse burnt out.
Connect the mains plug properly.
Change the fuse.
Start the appliance according to
instructions in chapter 'Installation'.
The thermostatic control is not on.
There is no voltage in the mains socket. (Try to
connect another appliance into it.)
Call an electrician.
The appliance is not supported properly.
The appliance is noisy.
Check if the appliance stands stable (all the
four feet should be on the floor).
In as much as the advice does not lead to result, call the nearest brand-mark service.
21
Repairs - After Sales Service
In the unlikely event of your appliance requiring service, or
if you wish to purchase spare parts, please contact our
extended warranty administrators by telephoning:
Spare parts
Always insist on genuine spare parts.
An authorised service engineer should service this
product, and only genuine spare parts should be used.
0870 010 7887
Under no circumstances should you attempt to repair
They will give you details for your local Service Force
Centre.
the machine yourself.
Repairs carried out by
inexperienced persons may cause injury or serious
malfunctioning. Contact your local Service Force Centre.
Before calling out an engineer, please ensure you have read
the details under the heading “Something Not Working”.
When you contact your local Service Force Centre you will
need to give the following details:
1.Your name, address and post code
2.Your telephone number
3. Clear and concise details of fault
4.The purchase date found on your receipt
5.The model and serial number of the appliance (found on
the rating plate - see picture on page 5)
So that you always have these numbers at hand, we
recommend you to make a note of them here:
Mod. :. . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . .
PNC :. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S.N. :. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Your Fridge - Freezer is covered by a 3 year parts
and labour guarantee (see separate details given at
point ofsale). Please retain your purchase receipt
safely for the service engineer to verify the purchase
details.
22
23
|