JLFZW1812
Freezer
Instruction manual
• The appliance is intended for keeping
foodstuff and/or beverages in a normal
household as explained in this instruction
booklet.
power plug may overheat and cause a
fire.
3. Make sure that you can come to the
mains plug of the appliance.
• Do not use a mechanical device or any
artificial means to speed up the thawing
process.
4. Do not pull the mains cable.
5. If the power plug socket is loose, do
not insert the power plug. There is a
risk of electric shock or fire.
• Do not use other electrical appliances
(such as ice cream makers) inside of
refrigerating appliances, unless they are
approved for this purpose by the
manufacturer.
6. You must not operate the appliance
without the lamp cover of interior
lighting.
• This appliance is heavy. Care should be
taken when moving it.
• Do not damage the refrigerant circuit.
• The refrigerant isobutane (R600a) is
contained within the refrigerant circuit of
the appliance, a natural gas with a high
level of environmental compatibility,
which is nevertheless flammable.
During transportation and installation of
the appliance, be certain that none of the
components of the refrigerant circuit
become damaged.
• Do not remove nor touch items from the
freezer compartment if your hands are
damp/wet, as this could cause skin
abrasions or frost/freezer burns.
• Avoid prolonged exposure of the
appliance to direct sunlight.
• Bulb lamps used in this appliance are
special purpose lamps selected for
household appliances use only. They are
not suitable for household room
illumination.
If the refrigerant circuit should become
damaged:
– avoid open flames and sources of
ignition
– thoroughly ventilate the room in which
the appliance is situated
• It is dangerous to alter the specifications
or modify this product in any way. Any
damage to the cord may cause a short-
circuit, fire and/or electric shock.
Daily Use
• Do not place hot items such as pans and
baking trays near the plastic components
of the appliance.
• Do not store flammable gas and liquid in
the appliance, because they may explode.
• Do not place food products directly
against the air outlet on the rear wall.1)
• Frozen food must not be re-frozen once it
has been thawed out.
Warning! Any electrical component
(power cord, plug, compressor) must
be replaced Service Force agent.
1. Power cord must not be lengthened.
• Store pre-packed frozen food in
accordance with the frozen food
manufacturer's instructions.
2. Make sure that the power plug is not
squashed or damaged by the back of
the appliance. A squashed or damaged
1) If the appliance is Frost Free
3
• Appliance's manufacturers storage
recommendations should be strictly
adhered to. Refer to relevant instructions.
• Please refer to the correct positioning and
location instructions that can be found in
the Installation section of this user guide.
• Do not place carbonated or fizzy drinks in • The appliance must not be located close
the freezer compartment as it creates
pressure on the container, which may
cause it to explode, resulting in damage to
the appliance.
to radiators or cookers.
• Make sure that the mains plug is
accessible after the installation of the
appliance.
• Ice lollies can cause frost burns if
consumed straight from the appliance.
Service
• Any electrical work required to do the
servicing of the appliance should be
carried out by a qualified electrician or
competent person.
Care and cleaning
• Before maintenance, switch off the
appliance and disconnect the mains plug
from the mains socket.
• Do not clean the appliance with metal
objects.
• This product must be serviced by an
authorised Service Centre, and only
genuine spare parts must be used.
• Do not use sharp objects to remove frost
from the appliance. Use a plastic scraper.
Environment Protection
• Regularly examine the drain in the
refrigerator for defrosted water. If
necessary, clean the drain. If the drain is
blocked, water will collect in the bottom
of the appliance.
This appliance does not contain
gasses which could damage the
ozone layer, in either its refrigerant
circuit or insulation materials. The
appliance shall not be discarded
together with the urban refuse and
rubbish. The insulation foam contains
flammable gases: the appliance shall
be disposed according to the
Installation
Important! For electrical connection
carefully follow the instructions given in
specific paragraphs.
applicable regulations to obtain from
your local authorities. Avoid
damaging the cooling unit, especially
at the rear near the heat exchanger.
The materials used on this appliance
marked by the symbol are
recyclable.
• Unpack the appliance and check if there
are damages on it. Do not connect the
appliance if it is damaged. Report possible
damages immediately to the place you
bought it. In that case retain packing.
• It is advisable to wait at least four hours
before connecting the appliance to allow
the oil to flow back in the compressor.
• In order to prevent over heating there
must be adequate circulation around the
appliance.
4
Contents
For the user
For the installer
Safety information
2
Technical data
15
Control panel
Display
Switching on
Switching off
Temperature regulation
Functions Menu
Eco Mode Function
Action Freeze Function
Drinks Chill Function
Child Lock Function
Temperature alarm
6
6
6
6
6
7
7
7
7
8
8
Installation
Location
Levelling
15
15
16
16
16
17
17
Positioning
Electrical Connection
Rear spacers
Door reversibility
First use
Cleaning the interior
8
8
Daily Use
8
8
9
9
9
9
Use of the freezer compartment
Storage of frozen food
Thawing
Guide to use the
instruction
manual
Cold accumulators
Ice-cube production
The following symbols will be
found in the text to guide you
throughout the instructions:
Helpful Hints and Tips
Hints for freezing
Hints for storage of frozen food
10
10
10
Safety instructions
Hints and tips
Care and cleaning
Periodic cleaning
Defrosting of the freezer
Periods of non-operation
11
11
11
11
What to do if…
Cleaning the evaporator
12
13
Environmental
information
5
Control panel
A B
C
D E
A - Appliance button ON/OFF
D - Function button
B - Temperature regulation button
C - Temperature and function indicator
E - Confirmation button
Display
Eco Mode is activated
Action Freeze is activated
Negative Temperature sign
Temperature
Temperature alarm
Drinks Chill is activated
Child Lock is activated
Switching on
Insert the plug into the power outlet. If the
display is not illuminated, press button (A),
to start the appliance.
Switching off
The appliance is shut off by pressing button
(A) until a countdown from -3 -2 -1 is
completed.
For optimal food storage select the Eco
Mode and the temperature is set to -18°C in
the freezer.
• Wait ca. 24 h, before loading food into
the freezer compartment.
Temperature regulation
The temperature may be changed by
pressing the button (B).
The current temperature setting flashes and
by pressing button (B) again the set
temperature is possible to change in steps of
one degree.
• To select a different temperature see
"Temperature regulation".
6
After some seconds is shown the set default To achieve maximum freezing capacity,
temperature.
allow a pre-cooling period of 24 hours,
before placing the fresh food in the
compartment with the symbol
.
Functions Menu
The freezing process takes 24 hours. During
this period do not put other foods in the
freezer.
This function stops automatically after 52
hours.
It is possible to deactivate the function at any
time by pressing button (D) until the
corresponding icon will flash and then
button (E).
By activating the key (D) the functions menu
is operating. Each function could be
confirmed by pressing button (E). If there is
no confirmation after some seconds the
display will go out from the menu and return
in normal condition. The following functions
are indicated:
Eco Mode function
Action Freeze function
Drinks Chill function
Child Lock function
Drinks Chill Function
The Drinks Chill function is to be used as a
safety warning when placing bottles in the
freezer compartment. It is activated by
pressing key (D) (several times if necessary)
Eco Mode Function
The Eco Mode function is activated by
pressing key D (several times if necessary)
until the corresponding icon appears
setting the temperature at -18°C).
You must confirm the choice by pressing key
E within few seconds. You will hear the
buzzer and the icon remains lighted.
In this condition the chosen temperatures
are automatically set (-18°C), in the best
conditions for storing food.
until the corresponding icon appears
.
You must confirm the choice by pressing key
(E) within few seconds. You will hear the
buzzer and the icon remains lighted.
In this condition it operates a timer with a
default value of 30 min. and it could change
from 1 to 90 min., by pressing key (B) you
select the minutes needed.
(or
At the end of the selected time there are the
following indications:
• on the indicator
the symbol flashing
It is possible to de-activate the function at
any time by changing the selected
• the icon flashing
temperature in the compartment.
• sounding of an acoustic alarm until key (E)
is pressed
At this point bear in mind to remove the
drinks contained in the freezer
compartment.
It is possible to deactivate the function at any
time by pressing key (D) until the
corresponding icon will flash and then key
(E).
Action Freeze Function
To freeze fresh foods, press button (D)
repeatedly to access the Action Freeze
function.
Confirm the selection by pressing button
(E), and you will hear the buzzer and the
display will show rotating lines.
7
• flashing temperature
• flashing icon
Child Lock Function
The Child Lock function is activated by
• acoustic buzzer
When normal conditions are restored:
• the acoustic alarm will stop
pressing key (D) (several times if necessary)
until the corresponding icon appears
.
You must confirm the choice by pressing key
(E) within few seconds. You will hear the
buzzer and the icon remains lighted. In this
condition any possible operation through
the keys does not cause any change as long
as this function is activated.
It is possible to de-activate the function at
any time by pressing key (D) until the
corresponding icon will flash and then key
(E).
• the temperature value continues to flash
• the Alarm icon continues to flash
When you press button (E) to deactivate
the alarm, the highest temperature reached
in the compartment appears on indicator
for some seconds.
Then it returns on the normal operation
showing the temperature of the selected
compartment.
During the alarm phase, the buzzer can be
switched off by pressing button (E).
Temperature alarm
Temperature increase in the freezer
compartment (for example due to an power
failure or door is open) is indicated by:
First use
Important! Do not use detergents or
abrasive powders, as these will damage the
finish.
Cleaning the interior
Before using the appliance for the first time,
wash the interior and all internal accessories
with lukewarm water and some neutral soap
so as to remove the typical smell of a brand-
new product, then dry thoroughly.
Daily Use
suggest setting the temperature to -18°C,
which is optimal for energy consumption and
frozen food storage.
Use of the freezer
compartment
The symbol
means that the
freezer is suitable for freezing fresh food and
for long term storage. The temperature may
be regulated between -15°C and -24°C. We
8
Important! At start-up the displayed
temperature don't correspond with the set
temperature until stabilised (within 24
hours).
Thawing
Deep-frozen or frozen food, prior to being
used, can be thawed in the refrigerator
compartment or at room temperature,
depending on the time available for this
operation.
Difference between the temperature
displayed and temperature setting is normal.
Especially when:
Small pieces may even be cooked still
frozen, directly from the freezer: in this case,
cooking will take longer.
• a new setting has recently been selected
• the door has been left open for a long
time
Cold accumulators
The freezer contains at least one cold
accumulator which increases storage time in
the event of a power cut or breakdown.
• warm food has been placed in the
compartment.
Difference until 5°C inside the compartment
are quite normal.
During normal functioning the indicator
shows the warmest temperature inside the
compartment.
Ice-cube production
This appliance is equipped with one or more
trays for the production of ice-cubes. Fill
these trays with water, then put them in the
freezer compartment.
Storage of frozen food
When first starting-up or after a period out
of use, before putting the products in the
compartment let the appliance run at least 2
hours on the higher settings.
Important! Do not use metallic
instruments to remove the trays from the
freezer.
If large quantities of food are to be stored,
remove all drawers and baskets from
appliance and place food on cooling shelves
to obtain the best performance.
Warning! Make sure that foods do
not exceed the load limit stated on
the side of the upper section (where
applicable)
Important! In the event of accidental
defrosting, for example due to a power
failure, if the power has been off for longer
that the value shown in the technical
characteristics chart under "rising time", the
defrosted food must be consumed quickly
or cooked immediately and then re-frozen
(after cooling).
9
Helpful Hints and Tips
• do not allow fresh, unfrozen food to
Normal Operating
Sounds
• You may hear a faint gurgling and a
bubbling sound when the refrigerant is
pumped through the coils or tubing. This
is not a fault with the appliance and is a
completely normal operating sound.
• When the compressor is on, the
refrigerant is being pumped around and
you will hear a whirring sound and a
pulsating noise from the compressor. This
is correct.
touch food which is already frozen, thus
avoiding a rise in temperature of the
latter;
• lean foods store better and longer than
fatty ones; salt reduces the storage life of
food;
• water ices, if consumed immediately after
removal from the freezer compartment,
can possibly cause the skin to be freeze
burnt;
• it is advisable to show the freezing in date
on each individual pack to enable you to
keep tab of the storage time.
• The thermic dilatation might cause a
sudden cracking noise. This is not a fault
with the appliance and is a completely
normal operating sound.
Hints for storage of
frozen food
To obtain the best performance from this
appliance, you should:
• make sure that the commercially frozen
foodstuffs were adequately stored by the
retailer;
• be sure that frozen foodstuffs are
transferred from the foodstore to the
freezer in the shortest possible time;
Hints for freezing
To help you make the most of the freezing
process, here are some important hints:
• the maximum quantity of food which can
be frozen in 24 hrs. is shown on the rating
plate;
• the freezing process takes 24 hours. No
further food to be frozen should be added
during this period;
• not open the door frequently or leave it
open longer than absolutely necessary.
• only freeze top quality, fresh and
thoroughly cleaned, foodstuffs;
• Once defrosted, food deteriorates rapidly
and cannot be refrozen.
• Do not exceed the storage period
indicated by the food manufacturer.
• prepare food in small portions to enable it
to be rapidly and completely frozen and
to make it possible subsequently to thaw
only the quantity required;
• wrap up the food in aluminium foil or
polythene and make sure that the
packages are airtight;
10
Care and cleaning
Many proprietary kitchen surface cleaners
Caution! Unplug the appliance
before carrying out any maintenance
operation.
contain chemicals that can attack/damage
the plastics used in this appliance. For this
reason it is recommended that the outer
casing of this appliance is only cleaned with
warm water with a little washing-up liquid
added.
This appliance contains hydrocarbons
in its cooling unit; maintenance and
recharging must therefore only be
carried out by authorised technicians.
After cleaning, reconnect the equipment to
the mains supply.
Periodic cleaning
Defrosting of the freezer
The equipment has to be cleaned regularly:
The freezer compartment of this model, on
the other hand, is a "no frost" type. This
means that there is no buildup of frost when
it is in operation, neither on the internal
walls nor on the foods.
• clean the inside and accessories with
lukewarm water and some neutral soap.
• regularly check the door seals and wipe
clean to ensure they are clean and free
from debris.
The absence of frost is due to the
continuous circulation of cold air inside the
compartment, driven by an automatically
controlled fan.
• rinse and dry thoroughly.
Important! Do not pull, move or damage
any pipes and/or cables inside the cabinet.
Never use detergents, abrasive powders,
highly perfumed cleaning products or wax
polishes to clean the interior as this will
damage the surface and leave a strong
odour.
Periods of non-operation
When the appliance is not in use for long
periods, take the following precautions:
• disconnect the appliance from
electricity supply
Clean the condenser (black grill) and the
compressor at the back of the appliance
with a brush or a vacuum cleaner. This
operation will improve the performance of
the appliance and save electricity
consumption.
• remove all food
defrost2) and clean the appliance and all
accessories
•
• leave the door/doors ajar to prevent
unpleasant smells.
If the cabinet will be kept on, ask somebody
to check it once in a while to prevent the
food inside from spoiling in case of a power
failure.
Important! Take care of not to damage
the cooling system.
2) If foreseen.
Download from Www.Somanuals.c1om1. All Manuals Search And Download.
What to do if…
During operation of the appliance some
smaller but annoying trouble can often
occur, which does not require calling a
technician out. In the following chart
information is given about them to avoid
unnecessary charges on service.
Important! The appliance operates
discontinuously, so the stopping of
compressor does not mean being no
current. That is why you must not touch the
electrical parts of the appliance before
breaking the circuit.
Important! The operation of the appliance
goes with certain sounds (compressor and
circulating sound). This not means a trouble,
but a normal operation.
Problem
Possible cause
Solution
The appliance is noisy.
The appliance is not supported
properly.
Check if the appliance stands
stable (all feet and wheels should
be on the floor). Refer to
"Levelling".
The cushion spacers located
between the back of the cabinet
and the pipes come loose.
Put them back in place again.
The buzzer sounds. The The temperature in the freezer is Refer to "High Temperature
Alarm icon flashing.
too high.
Alarm".
An error has occurred in
measuring the temperature.
Call your service representative
(the cooling system will continue
to keep food products cold, but
temperature adjustment will not
be possible).
is displayed in the
temperature display
The compressor
operates continually.
The Temperature regulator may Set a warmer temperature.
be set incorrectly.
The door is not closed correctly. Refer to "Closing the door".
The door has been opened too
frequently.
Do not keep the door open
longer than necessary.
The food temperature is too
high.
Let the food temperature
decrease to room temperature
before storage.
The room temperature is too
high.
Decrease the room temperature.
12
Problem
Possible cause
Solution
There is too much frost Food are not wrapped properly. Wrap the food better.
and ice.
The door is not closed correctly. Refer to "Closing the door".
The door gasket is deformed or Refer to "Closing the door".
dirty.
The temperature in the The Temperature regulator may Set a higher temperature.
appliance is too low.
be set incorrectly.
The temperature in the The Temperature regulator may Set a lower temperature.
appliance is too high.
be set incorrectly.
The door is not closed correctly. Refer to "Closing the door".
The food temperature is too
high.
Let the food temperature
decrease to room temperature
before storage.
The temperature in the Food is too near to each other.
freezer is too high.
Store food so that there is cold air
circulation.
Large quantities of food to be
frozen were put in at the same
time.
Insert smaller quantities of food to
be frozen at the same time.
The appliance does not The appliance is switched off.
Switch on the appliance.
operate.
The mains plug is not connected Connect the mains plug to the
to the mains socket correctly.
mains socket correctly.
The appliance has no power.
Connect another electrical
There is no voltage in the mains appliance to the mains socket.
socket.
Check fuse. Contact a qualified
electrician.
The door has been open to long. Close the door.
There is too much frost and ice Refer to "Cleaning the
evaporator".
A large quantity of
drops ice covers the top on the evaporator of the
compartment inside the appliance, the door was open for
appliance. .
too long time.
As much as the advice does not lead to result, call the nearest brand-mark service.
3. If necessary, replace the defective door
Closing the door
gaskets. Contact the Service Force
Centre.
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to
"Installation".
Cleaning the evaporator
1. Switch off the appliance.
Download from Www.Somanuals.c1om3. All Manuals Search And Download.
2. Disconnect the mains plug from the
mains socket.
3. Remove all foods from the freezer and
put them in a fresh place.
4. Move the appliance far from the wall.
5. Leave the door open.
6. After approximately 20 minutes the
drain hose at the rear of the cabinet
starts to discharge water into the drip
tray.
7. To prevent the water overflowing from
the drip tray dry with a sponge.
8. The defrosting process ends when the
water stops dripping. It may take
several hours if the problem started
long before.
9. Move the appliance to the original
position.
10. Clean and dry the inside of the
appliance.
11. Connect the mains plug into the mains
socket.
12. Switch on the appliance.
14
Technical data
Dimension of the recess
Height
1800 mm
600 mm
650 mm
20 h
Width
Depth
Rising Time
Voltage
230-240 V
50 Hz
Frequency
The technical information are situated in the
rating plate on the internal left side of the
appliance and in the energy label.
Installation
Read the "Safety Information"
carefully for your safety and correct
operation of the appliance before
installing the appliance.
50mm
Location
To ensure best performance, if the appliance
is positioned below an overhanging wall unit,
the minimum distance between the top of
the cabinet and the wall unit must be at least
40 mm . Ideally, however, the appliance
should not be positioned below overhanging
wall units.
If the cabinet is placed in a corner and the
side with the hinges facing the wall, the
distance between the wall and the cabinet
must be at least 10 mm to allow the door to
open enough so that the equipment can be
removed.
The ventilation space can be:
• directly above the appliance
• behind and above the top cupboard.
In this case, the space behind the top
cupboard must be at least 50 mm deep.
Download from Www.Somanuals.c1om5. All Manuals Search And Download.
Climate Ambient temperature
class
Levelling
When placing the appliance ensure that it
stands level. This can be achieved by two
adjustable feet at the bottom in front.
N
ST
T
+16°C to + 32°C
+16°C to + 38°C
+16°C to + 43°C
Electrical Connection
Caution! Any electrical work
required to install this appliance
should be carried out by a qualified
electrician or competent person.
Warning! This appliance must be
earthed.
The manufacturer declines any
liability should these safety measures
not be observed.
Important! The wires in the mains lead are
coloured in accordance with the following
code:
Positioning
GREEN & YELLOW
13 AMP. FUSE
Warning! If you are discarding an
old appliance that has a lock or catch
on the door, you must ensure that it
is made unusable to prevent young
children being trapped inside.
Important! The appliance should have the
plug accessible after installation.
BROWN
BLUE
Install this appliance at a location where the
ambient temperature corresponds to the
climate class indicated on the rating plate of
the appliance:
CORD CLAMP
Green and Yellow:
Brown:
Earth
Live
1
3
5
Climate Ambient temperature
class
Blue:
Neutral
SN
+10°C to + 32°C
16
As the colours of the wires in the mains lead
of this appliance may not correspond with
the coloured markings identifying the
terminals in your plug, proceed as follows:
1. Connect the wire coloured green and
yellow to the terminal marked either
with the letter “E“ or by the earth
symbol or coloured green and yellow.
2. Connect the wire coloured blue to the
terminal either marked with the letter
“N“ or coloured black.
3. Connect the wire coloured brown to
the terminal either marked with the
“L“ or coloured red.
4. Check that no cut, or stray strands of
wire is present and the cord clamp
secure over the outer sheath.
4
is
5. Make sure the electricity supply voltage
is the same as that indicated on the
appliance rating plate.
6. Switch on the appliance.
The appliance is supplied with a 13 amp plug
Slacken the screws and insert the spacer
under the screw head, then retighten the
screws.
fitted
2
. In the event of having to change
the fuse in the plug supplied, a 13 amp ASTA
approved (BS 1362) fuse must be used.
Door reversibility
Warning! A cut off plug inserted
into a 13 amp socket is a serious
safety (shock) hazard. Ensure that it is
disposed of safely.
Warning! Before carrying out any
operations, remove the plug from the
power socket.
To carry out the following operations, we
suggest that this be made with another
person that will keep a firm hold on the
door of the appliance during the operations.
Gently lay the appliance on its back.
To change the opening direction of the
door, do these steps:
Rear spacers
Inside the appliance you find two
spacers which must be fitted as shown
in the figure.
1. Remove the clip-in ventilation grille,
remove the plug (e) from the ventilation
grille and install it on the opposite side.
2. Remove the bottom hinge (A) by
unscrewing the fixing screws.
Download from Www.Somanuals.c1om7. All Manuals Search And Download.
accessory bag the two plugs and cover
the holes left open after having
removed the handle.
f
A
A
e
3. Remove the door.
4. Unscrew the pin (f) of the bottom hinge
and install it on the opposite side.
5. Unscrew the pin of the upper hinge and
install it on the opposite side.
9. Make sure that the front board of the
door is parallel to the front board of the
top.
10. Reposition, level the appliance, wait for
at least four hours and then connect it
to the power socket.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabinet.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to
the cabinet. In that case, wait for the natural
fitting of the gasket.
6. Install the door in the upper hinge.
7. Install the ventilation grille, clipping it
into place.
8. Unscrew the handle. Remove the plug
with a punch. Install the handle and the
plug on opposite side. Take from the
Repairs-After Sales Service
If the unlikely event of your appliance
requiring service, or if you wish to purchase
spare parts, please contact our extended
warranty administrators by telephoning:
0870 010 7887
They will give you details of your local
Service Force Centre.
18
Before calling out an engineer, please ensure S.No. : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
you have read the details under the heading
''What to do if''.
. . . .
Your appliance is covered by a 3 year parts
and labour guarantee (see separate details
given at point of sale). Please retain your
purchase receipt safely for the service
engineer to verify the purchase details.
When you contact your local repair agent
you will need to give the following details:
1. Your name, address and post code.
2. Your telephone number.
3. Clear and concise details of fault.
Spare parts
4. The purchase date (found on your
receipt).
An authorised service engineer should
service this product and only genuine spare
parts should be used.
5. The model and serial number of the
appliance (found on the rating plate).
So that you always have these numbers at
hand, we recommend that you make a note
of them here:
Mod. : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . .
PNC : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . .
Under no circumstances should you attempt
to repair the machine yourself. Repairs
carried out by inexperienced persons may
cause injury or serious malfunctioning.
Contact your local repair agent by
telephoning:
0870 010 7887
Environmental concerns
The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will
help prevent potential negative
consequences for the environment and
human health, which could otherwise be
caused by inappropriate waste handling of
this product. For more detailed information
about recycling of this product, please
contact your local council, your household
waste disposal service or the shop where
you purchased the product.
Download from Www.Somanuals.c1om9. All Manuals Search And Download.
|