MODEL
840457
19.2V CORDLESS WAXER / POLISHER
INSTRUCTION MANUAL
BATTERIES AND
CHARGERS
SOLD SEPARATELY
Conforms to UL STD 60745-1,
60745-2-4
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION,
MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND
UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS. FAILURE TO DO
SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE.
FOR CUSTOMER SERVICE
POUR LE SERVICE APRÉS VENTE
OU DU CONSOMMATEUR
IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE
PRODUCT, DO NOT RETURN THIS PRODUCT TO THE STORE. PLEASE CALL OUR CUSTOMER SERVICE
DEPARTMENT AT 1-800-590-3723. BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION
AVAILABLE: MODEL No., DATE PURCHASED AND STORE LOCATION. AN ALLTRADE
REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU WOULD LIKE TO MAKE
A SUGGESTION OR COMMENT, GIVE US A CALL OR EMAIL US AT: INFO@ALLTRADETOOLS.COM.
YOUR FEEDBACK IS VITAL TO US.
87-1904-60957
KAWASAKI™ IS A TRADEMARK LICENSED BY KAWASAKI™ MOTORS CORP.,
U.S.A., WHICH DOES NOT MANUFACTURE OR DISTRIBUTE THIS PRODUCT.
CONSUMER INQUIRES SHOULD BE DIRECTED TO:
PARA EL SERVICIO
PARA EL CONSUMIDOR
©COPYRIGHT 2007 ALLTRADE TOOLS, LLC.
1431 VIA PLATA
1-800-590-3723
LONG BEACH, CA 90810-1462 USA
840457 –19.2V Cordless Waxer/Polisher_Rev 7/14/07
Printed in China
WORK AREA
WARNING
indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury.
Keep your work area clean and well lit.
invite accidents.
Cluttered benches and dark areas
CAUTION
indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injury.
Do not operate power tools in explosive atmospheres, such as in the pres-
ence of flammable liquids, gases or dust.
may ignite the dust or fumes.
Power tools create sparks which
CAUTION
used without the safety alert symbol
indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control.
NOTE
provides additional information that is useful
for proper use and maintenance of this tool. If a
NOTE is indicated make sure it is fully understood.
ELECTRICAL SAFETY
IMPORTANT SAFEGUARDS
Do not abuse the cord. Never use the cord to carry the tool. Keep the cord
away from heat, oil, sharp edges, or moving parts. Replace damaged cords
immediately.
Damaged cords may create a fire.
A battery operated tool with integral batteries or a separate battery pack
must be recharged only with the specified charger for the battery.
People with electronic devices, such as pacemakers, should consult their
physician(s) before using this product. Operation of electrical equipment in
close proximity to a heart pacemaker could cause interference or failure of
the pacemaker.
A charger
that may be suitable for one type of battery may create a risk of fire when used with
another battery.
WARNING:
Some dust created by power sanding, sawing, grinding, drilling and
Use battery operated tool only with specifically designated battery pack.
any other batteries may create risk of fire.
Use of
other construction activities contains chemicals known to the State of California
to cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks and cement and other masonry products,
and arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type
of work. To reduce your exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such as dust masks that are
specially designed to filter out microscopic particles.
WARNING:
Handling the power cord on corded products may expose you to
lead, a chemical known to the State of California to cause cancer and birth
Wash hands after handling.
defects or other reproductive harm.
3
4
PERSONAL SAFETY
When battery pack is not in use, keep it away from other metal objects like:
paper clips, coins, keys, nails, screws, or other small metal objects that can
Stay alert, watch what you are doing, and use common sense when operat-
ing a power tool. Do not use tool while tired or under the influence of drugs,
make a connection from one terminal to another.
Shorting the battery termi-
nals together may cause sparks, burns or a fire.
alcohol or medication.
A moment of inattention while operating power tools
may result in serious personal injury.
Maintain tools with care. Keep cutting tools sharp and clean
. Properly main-
tained tools with sharp cutting edge are less likely to bind and are easier to con-
trol.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
Keep your hair, clothing, and gloves away from moving parts.
Loose clothes,
jewelry or long hair can be caught in moving parts.
Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the tool’s operation. If damaged, have the
Avoid accidental starting. Be sure switch is in the locked or “OFF” position
before inserting battery pack.
tool serviced before using.
Many accidents are caused by poorly maintained
Carrying power tools with your finger on the
tools.
switch or inserting battery pack into a tool with the power switch “on” invites
accidents.
Use only accessories that are recommended by the manufacturer for your
model.
Accessories that may be suitable for one tool may create a risk of injury
when used on another tool.
Remove adjusting keys or wrenches before turning the tool “ ON” .
A wrench or a key that is left attached to a rotating part of the tool may result
in personal injury.
Do not overreach. Keep proper footing and balance at all times.
Proper foot-
SERVICE
ing and balance enable better control of the tool in unexpected situations.
Use safety equipment. Always wear eye protection.
Dust mask, non-skid
safety shoes, hard hat, or hearing protection must be used for appropriate
conditions.
Tool service must be performed only by qualified repair personnel.
or maintenance by unqualified personnel may result in a risk of injury.
Service
When servicing a tool, use only identical replacement parts. Follow instruc-
tions in the Maintenance section of this manual.
TOOL USE AND CARE
Use of unauthorized parts or
failure to follow Maintenance Instructions may create a risk of shock or injury.
Use clamps or other practical ways to secure and support the workpiece to a
SPECIFIC SAFETY RULES AND/OR SYMBOLS
stable platform.
Holding the work by hand or against your body is unstable and
may lead to loss of control.
Hold tool by insulated gripping surfaces when per-
forming an operation where the cutting tool may contact hidden wiring.
Contact with a “live” wire will also make exposed metal parts of the tool
“live” and shock the operator.
Do not force tool. Use the correct tool for your application.
will do the job better and safer at the rate for which it is designed.
The correct tool
Do not use the tool if the power switch does not turn it “ON” or “OFF”.
A tool that
cannot be controlled with the switch is dangerous and must be repaired.
Disconnect battery pack from tool or place the switch in the locked or “OFF”
position before making any adjustments, changing accessories, or storing the
tool.
Such preventative safety measures reduce the risk of starting the tool accidentally.
Store idle tools out of reach of children and other untrained persons.
Tools
are dangerous in the hands of untrained users.
6
SAFETY RULES FOR THE WAXER/POLISHER
SYMBOLS
IMPORTANT:
Some of the following symbols may be used on your tool. Please
study them and learn their meaning. Proper interpretation of these symbols will
allow you to operate the tool better and safer.
Always wear safety goggles or eye protection when using this tool.
Use a
dust mask or respirator for applications which generate dust.
SYMBOL
NAME
Volts
EXPLANATION
Voltage (Potential)
ALWAYS hold the Cordless Waxer/Polisher with BOTH hands.
V
A
Amperes
Hertz
Watt
Kilograms
Alternating Current
Direct Current
Current
Secure the material being worked on. Never hold it in your hand or across
your legs.
Unstable support can cause loss of control and injury.
Check to see that keys and adjusting wrenches are removed from the
Hz
W
Kg
Frequency (Cycles per Second)
Power
Weight
Type of Current
Type of Current
Cordless Waxer/Polisher before switching the tool “ON”.
Keys or wrenches
can fly away at high velocity striking you or a bystander.
Keep the ventilation openings clear of dust, hair, paper or any other items
that may restrict air flow.
Alternating or Direct Current Type of Current
Earthing Terminal
Class II Construction
Minutes
Seconds
Diameter
Grounding Terminal
Denotes Double Insulation
Time
Time
Size of Drill Bits,
Grinding Wheels, etc.
No-load Rotational Speed
Revolutions, Surface Speed,
Strokes, etc. per Minute
Speed, Torque or Position Settings
Keep hands away from moving parts.
Keep clothes or long hair away from spinning pad.
min
s
Disconnect the plug or remove the battery pack from tool and place the
switch in the locked or “OFF” position before making any assembly adjust-
ments, changing accessories, performing any inspection, maintenance or
cleaning procedures.
Such preventive safety measures reduce the risk of start-
No load speed
Revolutions per Minute
ing the tool accidentally.
.../min
Do not use the Cordless Waxer/Polisher if it has been damaged, left outdoors
in the rain, snow, wet or damp environments, or immersed in liquid.
1,2,3, …
Ring Selector Settings
Maintain labels and nameplates on the Cordless Waxer/Polisher.
These carry
important information. If unreadable or missing, contact Alltrade for a replacement.
7
8
FUNCTIONAL DESCRIPTION
5
Use only Kawasaki™ 19.2V Battery Pack #691034 or
#691240 with the One Hour Charger #690507 or Charger #690072/ Adapter
#690074.
4
CONTROLS AND COMPONENTS:
1. ON/OFF Switch
2. Form Pad
3. Comfort Grip Handles
4. Synthetic Wool Bonnet
5. Terry Cloth Bonnet
3
3
The battery is not fully charged.
Charger #690072/ Adapter #690074 -
Before first use, the battery pack
requires 8-10 hours charge time to be fully charged. Subsequent recharging
needs 3-5 hours for the battery to be fully charged.
2
One Hour Charger #690507 -
hours charge time to be fully charged. Subsequent recharging needs 1 hour for
the battery to be fully charged.
Before first use, the battery pack requires 3-5
1
Always switch to a fresh battery when tool performance begins to diminish.
Severe heat is most destructive to a battery; the more heat generated, the faster
the battery loses power. A battery that gets too hot can have a shortened life.
BATTERY
Never over-discharge a battery by using the tool even after tool performance
has decreased.
Do not attempt to discharge a tool’s battery by continuing to
Before using battery pack, please read carefully all instruc-
tions and cautionary markings on battery pack, battery
charger and product using battery.
pull on the tool trigger. When tool performance begins to diminish, stop the tool
and recharge the battery for optimal performance.
®
Charge battery pack at ambient temperatures between 50° F – 104° F.
Do not incinerate the battery pack even if it is severely
Store tool and battery pack in locations where temperatures will not exceed
damaged or is completely worn out.
The battery pack can
120°F.
This is important to prevent serious damage to the battery cells.
explode.
The battery pack should always be recharged when the Cordless Waxer/Polisher
begins to run slowly.
Do not carry battery packs in aprons, pockets, or tool boxes, product kit
boxes, drawers, etc. with loose metal objects.
battery pack terminals could
be short circuited causing damage to the battery pack, severe burns or fire.
When battery pack is not in use, keep it away from other metal objects such as
paper clips, coins, keys, nails, screws or other small metal objects that can
The battery pack is Nickel-Cadmium (Ni-Cad) and is considered to be a toxic
make a connection from one terminal to another.
Shorting the battery terminals
material by the Environmental Protection Agency.
Before disposing of
together may cause sparks, burns, or fire.
damaged or worn out Ni-Cad battery packs, check with your State
Environmental Protection Agency to find out about special restrictions on the
disposal of these battery packs, take them to your local recycling center for
1-800-822-8837
proper disposal, or call
.
9
10
Do not use charger if it has been damaged, left outdoors in the rain, snow, wet
or damp environments, or immersed in liquid.
REMOVING / ATTACHING BATTERY PACK
The battery pack and charger heat during charging.
Place the charger on a flat,
non-flammable surface away from flammable materials with at least four inches of
clearance to allow proper air circulation around the charger and battery pack.
When the battery pack requires recharging, a 3-5 hours charge allows the tool to
operate at full power.
A charging indicator light on the charger will illuminate to
show that charging is taking place.
RELEASE
BUTTON
CHARGING BATTERY PACK USING CHARGER #690072 / ADAPTER #690074
BATTERY PACK
CHARGE BATTERY PACK:
1. Make sure the trigger on the
Cordless Waxer/Polisher is
REMOVE BATTERY PACK:
1. Press both release buttons on either side of the Cordless Waxer/Polisher to
release the battery pack.
120V AC
ADAPTER
“OFF”
in the
position and
remove the battery pack
from the Cordless
Waxer/Polisher.
2. Pull battery pack free of Cordless Waxer/Polisher.
ATTACH BATTERY PACK:
LED LIGHT
1. Align the raised portion of the battery pack with the groove in the battery
compartment of the Cordless Waxer/Polisher.
2. Insert the battery pack into
the charger. Be sure that the
battery pack is fully seated
in the charger. Do not force.
2. Press the battery pack into place. Make sure the latches are securely fastened.
Do not use the Cordless Waxer/Polisher if the battery pack is not seated
properly.
BATTERY
CHARGER
3. Plug the charger into the
nearest 120 volt, electrical
outlet. The indicator light will come
CHARGER #690072 / ADAPTER #690074
“ON”
.
IMPORTANT INFORMATION FOR RECHARGING HOT BATTERIES
Before using battery charger, please read carefully all
instructions and cautionary markings on battery charger, battery pack and
product using battery.
When using your Cordless Waxer/Polisher continuously, the batteries in your bat-
tery pack will become hot. You should let a hot battery pack cool down for approx-
imately 30 minutes before attempting to recharge. When the battery pack becomes
discharged and is hot, the red light on the charger will flash. When the battery pack
cools down, the red light will glow continuously.
The charger will not automatically turn “OFF” when the
battery pack is fully charged. The charging indicator light will remain “ON”
until the charger is disconnected from the electrical outlet. To prolong
battery life, REMOVE battery from charger after 3-5 hours of recharging.
This will occur when continuous use of your Cordless
Waxer/Polisher causes the battery pack to become hot.
It does not occur
under normal circumstances.
Use only the charger which accompanied your product or direct replacement as
listed in this manual.
Do not substitute any other charger. Use only Alltrade
approved chargers with your product.
Do not disassemble charger.
11
12
4. After approximately one hour of charging, the red indicator light should go
“OFF” “ON”
ONE HOUR CHARGER #690507
and the green light should come
battery is fully charged.
. The green light indicates that the
Before using battery charger, please read carefully all
instructions and cautionary markings on battery charger, battery pack and
product using battery.
5. When fully charged, reattach battery pack onto Cordless Waxer/Polisher, making
certain latches fasten securely. Cordless Waxer/Polisher will not operate properly
if the battery pack is not seated properly.
Use only the charger which accompanied your product or direct replacement as
listed in this manual.
Do not substitute any other charger. Use only Alltrade
OPERATING THE WAXER/POLISHER
approved chargers with your product.
Do not disassemble charger.
Be aware that this tool is always in an operating condition
because it does not have to be plugged into an electrical outlet. Always turn the
Do not use charger if it has been damaged, left outdoors in the rain, snow, wet
or damp environments, or immersed in liquid.
“OFF”
switch
and remove the battery pack before changing bonnets or
servicing.
The battery pack and charger heat during charging.
Place the charger on a flat,
non-flammable surface away from flammable materials with at least four inches of
clearance to allow proper air circulation around the charger and battery pack.
BEFORE USE:
• Make sure the car is
clean. Wash thoroughly
to remove all dirt and
road film. Waxing a dirty
car will scratch the car’s
finish.
When the battery pack requires recharging, a 1 hour charge allows the tool to
operate at full power.
A charging indicator light on the charger will illuminate to
show that charging is taking place.
CHARGING BATTERY PACK USING ONE HOUR CHARGER #690507
• Remove the battery
pack to prevent acciden-
tal starting.
BATTERY PACK
CHARGE BATTERY PACK:
1. Plug the charger into the nearest
120 volt electrical outlet. The
step of the battery has positive
and negative terminal markings
on it. Align the markings with
the identical markings on the top
of the charger base. Insert the
battery pack into base. Pack will
not insert properly if reversed.
• Turn the waxer upside-
down with the foam pad
facing up.
• Slip the synthetic wool bonnet over the foam pad. Tuck the elastic down evenly
around the pad so the bonnet will not come off while in use.
2. Make sure the trigger on the
Cordless Waxer/Polisher is in the
“OFF”
position and remove the
BATTERY
CHARGER
battery pack from the Cordless
Waxer/Polisher.
“ON”
3. If, when first inserting the battery pack, the red
press the “SET” button on the charger. When the battery is charging, the red
“ON”
button does not light up,
light is
.
13
14
WAXING
MAINTENANCE AND CLEANING
Always remove the battery pack before attempting
The bonnet will absorb the wax as you work. Reapply as
cleaning or maintenance.
necessary.
Do not use paint thinner or any other chemicals to clean the waxer/polisher case.
Harsh solvents may damage the plastic. Use only mild soap and water for cleaning.
• Never apply wax in direct
sunlight.
Clean vents frequently. Keep clear of all dirt and obstructions.
• Wash and dry vehicle before
waxing.
Wash bonnets in warm soapy water. Do not use harsh detergents. Air dry complete-
ly before use.
• Make sure you have a firm grip
on the waxer/polisher before
Worn bonnets may be replaced with any standard 7-8" bonnet.
ON
switching power
.
ACCESSORIES
NEVER
•
press down on the
waxer/polisher. Move over the
surface with light, sweeping
strokes.
Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one tool may become hazardous when used on
another tool.
• Using a crisscross pattern,
work your way across the broad, flat surfaces of the car first. Move across the
hood, over the roof, down the trunk and around the sides.
Always attach grounded (3-prong) extension cords to grounded (3-hole) outlets.
If you must use an extension cord, be sure that the gauge is large enough to carry
the amount of current necessary for your power tool.
If not, your tool may
experience a loss of power, excessive voltage drop or overheating. The smaller the
gauge number, the heavier the cord (see table on next page).
POLISHING
• Slip the terry cloth
bonnet over the foam
pad, making sure that
the elastic is securely
tucked around the
pad.
RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLS
TOOL CURRENT RATING
CONDUCTOR SIZE IN A.W.G
AMPERE
3-6
6-8
8-10
10-12
12-16
16-20
10FT.
18
18
18
16
25FT.
18
18
18
16
50FT.
18
18
18
14
100FT.
18
16
14
14
-
• Polish surfaces in the
same order that you
waxed them.
14
12
12
12
12
12
-
• Hard-to-reach areas
can be polished by
hand. Slip the bonnet
over your fingers and
polish in small circles,
working your way around door handles or under edges.
15
16
PURPOSES OR ON A JOBSITE
is not covered under this warranty.
SPECIFICATIONS
SPECIFICATIONS
The date of purchase shall be the date of shipment to the original purchaser, or the
date the original purchaser took possession, custody or control of the product,
whichever occurred first. This warranty shall be null and void if the product or any
component thereof is modified, altered or used for any commercial purpose or on
a jobsite. This warranty does not apply to any other product and/or component
thereof manufactured or distributed by Alltrade, and does not apply to products
and/or components thereof designed, manufactured and/or assembled by others,
Voltage
19.2V
3300 RPM
7"
No Load Speed
Pad Size
Battery Type
Ni-Cad
THERE ARE NO WARRANTIES
WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF.
for which Alltrade makes no warranties whatsoever.
PROTECTING THE ENVIRONMENT
BATTERIES
Warranty Performance
Alltrade batteries can be recharged many times. At the end of their useful life, recy-
cle batteries with due care for our environment.
By purchasing the product, purchaser expressly acknowledges and agrees that their
sole and exclusive remedy under this warranty shall be strictly limited to the repair
or replacement of any covered nonconforming items or parts thereof provided that
any such nonconforming item and/or part is promptly returned to Alltrade’s facility
postage pre-paid and insured (address: ALLTRADE Warranty Claims & Repair,
1431 Via Plata, Long Beach, CA 90810, Attn: Customer Service #1-800-590-3723)
within the applicable warranty period, with a written request by purchaser that
Alltrade repair and/or replace the nonconforming item and/or part. We recommend
that you keep the original product packaging in the event you need to ship the unit.
We suggest the package be insured against loss or in transit damage. When
sending your product include your name, address, phone number, dated proof
of purchase (or copy), and a statement about the nature of problem. Warranty
coverage is conditioned upon purchaser furnishing Alltrade with adequate written
proof that they are the original purchaser and of the original purchase date. Parts
returned, freight prepaid and insured, to Alltrade’s facility (see above address) will
be inspected and, at Alltrade’s option, repaired and/or replaced free of charge if
found to be defective and subject to warranty. Alltrade retains the sole discretion
to determine whether any item or part is nonconforming and, if so, whether the
item and/or part will be repaired and/or replaced. If the unit is repaired, new or
reconditioned replacement parts may be used. If Alltrade chooses to replace
the product, it may replace it with a new or reconditioned one of the same or
comparable design. The repaired or replaced unit will be warranted under the terms
of the remainder of the warranty period. Typically, a defective product that is
returned within the first 30 days after the purchase date will be replaced; for items
returned after the first 30 days and within the warranty period, covered defective
parts not subject to normal wear and tear or other exclusions will be repaired or
replaced, at Alltrade’s option. During the warranty period, Alltrade will be responsi-
ble for the return shipping charges. Alltrade’s repair and/or replacement of any non-
conforming item and/or part thereof shall constitute fulfillment of all
obligations to the purchaser. Alltrade shall not be responsible or liable for any
expense, including freight charges, or repairs made outside Alltrade’s facility, unless
Ni-Cad and Ni-MH batteries are recyclable. Take them to your local recycling center
1-800-822-8837
. Collected batteries will be recycled or disposed of properly.
or call
OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS
Alltrade offers a full range of Kawasaki™ tools that make DIY jobs easy. If you would
like further information on the following products, please contact Alltrade Customer
Service Department at 1-800-590-3723.
Cordless Drills/Screwdrivers
Impact Wrenches
Sanders
Angle Grinders
Reciprocating Saws
Routers
Jigsaws
Rotary Tools
Circular Saws
Corded and Cordless Multi-Purpose Tools
Wide Range of Accessories and more
2 YEAR LIMITED HOME USE WARRANTY
Express and Exclusive Limited Home Use Warranty to Original Retail Buyer
Alltrade Tools LLC (hereinafter "Alltrade") expressly warrants to the original retail
purchaser of the accompanying KAWASAKI™ portable power tool and no one else
all parts of the product (except those parts referred to below which are specifically
excluded from such warranty (see Exclusions)) to be free from defects in materials
and workmanship for a period of two years from original date of purchase.
SPECIAL WARRANTY NOTE TO CONTRACTORS AND COMMERCIAL USERS:
Kawasaki™ portable power tool is offered as a home use tool and carries a
This
HOME
USE WARRANTY
.
This tool is made for home use in the execution of
COMMERCIAL
projects and repairs in and around the home. Use of the tool for
18
expressly agreed to by Alltrade in writing. Under no circumstances shall Alltrade
bear any responsibility for loss of the unit, loss of time or rental, inconvenience,
commercial loss or consequential damages.
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. NO WARRANTY, ORAL OR WRITTEN, OTHER THAN THE ABOVE
WARRANTY IS MADE WITH REGARD TO THIS PRODUCT. ALL EXPRESS AND/OR
IMPLIED WARRANTIES, GUARANTIES AND/OR REPRESENTATIONS BY ALLTRADE
AND/OR ITS REPRESENTATIVE(S) REGARDING THE DESIGN, MANUFACTURE,
PURCHASE, USE AND/OR OPERATION OF THE PRODUCT OR ANY COMPONENT
THEREOF SOLD HEREUNDER, REGARDLESS OF WHETHER ANY SUCH WARRANTY,
GUARANTY AND/OR REPRESENTATION, WRITTEN OR ORAL, ARISES BY
OPERATION OF LAW AND/OR EQUITY AND/OR BY ANY ACT OR OMISSION OF
ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE PURCHASER, INCLUDING
BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY
EXCLUDED AND DISCLAIMED BY ALLTRADE AND/OR ITS REPRESENTATIVES.
PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH
WARRANTIES AND RIGHTS, CLAIMS AND/OR CAUSES OF ACTION ARISING
THEREFROM OR BASED THEREON. PURCHASER’S SOLE AND EXCLUSIVE
REMEDY IS AS STATED ABOVE.
Exclusions
This warranty does not cover parts damaged due to normal wear, abnormal
conditions, misapplication, misuse, abuse, accidents, operation at other than
recommended pressures or temperatures, improper storage or freight damage.
Parts damaged or worn by operation in dusty environments are not warranted.
Failure to follow recommended operating and maintenance procedures also
voids warranty.
This limited warranty does not apply to accessory items such as drill bits,
screwdriving bits, circular saw blades, jigsaw blades, grinding wheels, sanding
sheets and other related items.
DAMAGE TO THE PRODUCT RESULTING FROM TAMPERING, ACCIDENT, ABUSE,
NEGLIGENCE, FAILURE TO FOLLOW INSTRUCTIONS, UNAUTHORIZED REPAIRS
OR ALTERATIONS, DAMAGE WHILE IN TRANSIT TO OUR SERVICE FACILITY,
USE OF UNAPPROVED OR IMPROPER ATTACHMENTS OR ACCESSORIES,
COMMERCIAL AND RENTAL APPLICATIONS OR OTHER CAUSES UNRELATED TO
PROBLEMS WITH MATERIAL OR WORKMANSHIP ARE NOT COVERED BY THIS
WARRANTY.
Limitation Of Liability
IN NO EVENT SHALL ALLTRADE AND/OR ITS REPRESENTATIVE(S) BE LIABLE FOR
INDIRECT, INCIDENTAL, SPECIAL AND/OR CONSEQUENTIAL DAMAGES OF ANY
KIND ARISING OUT OF OR RELATED TO, DIRECTLY OR INDIRECTLY, ANY BREACH
OF ANY PROVISION OF ANY AGREEMENT BETWEEN ALLTRADE AND/OR ITS
REPRESENTATIVE(S) AND PURCHASER, ANY WARRANTY HEREUNDER,
AND/OR THE EXISTENCE, DESIGN, MANUFACTURE, PURCHASE, USE AND/OR
OPERATION OF ANY ITEM(S) SOLD HEREUNDER EVEN IF ALLTRADE AND/OR ITS
REPRESENTATIVE(S) HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH
DAMAGES. IN NO EVENT, WHETHER AS A RESULT OF A BREACH OF CONTRACT,
WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL
ALLTRADE’S AND/OR ITS REPRESENTATIVE(S)’ LIABILITY EXCEED THE PRICE OF
THE PRODUCT. ANY AND ALL LIABILITY CONNECTED WITH THE USE OF
THIS PRODUCT SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY
PERIODS SPECIFIED ABOVE.
Alltrade will not be liable for the following: labor charges, loss or damage resulting
from improper operation, maintenance or repairs made by other persons;
pre-delivery services such as assembly, oil or lubricants, and adjustment;
maintenance services that are normally required to maintain the product.
The use of other than genuine Alltrade Repair Parts will void warranty.
Warranty Disclaimers
EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES,
GUARANTIES AND/OR REPRESENTATIONS. EXCEPT FOR THE LIMITED WARRANTY
PROVIDED ABOVE, ALL OTHER EXPRESS WARRANTIES, GUARANTIES AND/OR
REPRESENTATIONS BY ALLTRADE AND/OR ITS REPRESENTATIVE(S) REGARDING
THE DESIGN, MANUFACTURE, PURCHASE, USE AND/OR OPERATION OF THE
PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER, REGARDLESS OF
WHETHER ANY SUCH WARRANTY, GUARANTY AND/OR REPRESENTATION,
WRITTEN OR ORAL, ARISES BY OPERATION OF LAW AND/OR EQUITY AND/OR BY
ANY ACT OR OMISSION OF ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE
BUYER, ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE
AND/OR ITS REPRESENTATIVES. PURCHASER KNOWINGLY AND WILLINGLY
WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS, CLAIMS AND/OR
CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON. PURCHASER’S
SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE.
Limitations on Warranty Disclaimers
Some states do not allow limitations on how long an implied warranty lasts
and some states do not allow the exclusion or limitation of the incidental or
consequential damages, so part or all of the above limitations or exclusions may not
apply to you. This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.
If your product is not covered by this warranty, please call our Customer Service
Department toll free at 1-800-590-3723 for general repair information and charges.
EXCLUSION AND DISCLAIMER OF ALL IMPLIED WARRANTIES, INCLUDING THE
19
20
|