These limits are part of comprehensive
standards and establish permitted levels of
radio frequency energy for the general
population. The guidelines are based on
standards that were developed by independent
scientific organizations.
This phone was tested for operation next to the
body and complies with the exposure
specifications of Anatel RF when used with the
Kyocera Wireless of Brazil (KWB) supplied and
approved holster CV90-B1753-01 or when used
with an accessory that does not contain metal
and that positions the phone at a minimum of
15.0 mm from the body.
The standards include a substantial safety
margin designed to assure the safety to all
persons, regardless of age and health.
While there may be differences between the
SAR levels of various phones and at various
positions, they all meet the government
requirements with regard to safe exposure.
The exposure standard for wireless mobile
devices employs a unit of measurement known
as the Specific Absorption Rate, or SAR. The
SAR limit set by Anatel is 2.0 W/kg.*
Anatel has granted an equipment authorization
for this model phone with all reported SAR levels
evaluated as in compliance with the radio
frequency emission guidelines of Anatel.
Tests for SAR are conducted using standard
operating positions specified by the standards of
Anatel, with the phone transmitting at its highest
certified power level, in all frequency bands.
SAR information on this model phone is on file
with Anatel and can be found at its web site.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating may be well below the
maximum value. This is because the phone is
designed to operate at multiple power levels, so
as to use only the power required to reach the
network. In general, the closer the telephone
is to a radio base station, the lower the
power transmitted.
Additional information on SAR values can be
found on the web site of CTIA (Cellular
Telecommunications and Internet Association),
* In the United States and Canada, the SAR limit
for mobile phones used by the public is 1.6 watts/
kg (W/kg) averaged over one gram of tissue. The
standard incorporates a substantial margin of
safety to give additional protection to the public,
and to account for any variation in measurement.
Before a phone model is available for sale to the
public, it must be tested, approved, and certified
by Anatel that it does not exceed the limit of the
government requirements related to safety in the
event of exposure to interference. The tests are
conducted in positions and locations (e.g., at the
ear and used next to the body) specified by
Anatel for each model. The highest values of the
SAR for this phone model are described below
in accordance with the technical certificate
of compliance.
Caution
The user is cautioned that changes or
modifications not expressly approved by the
party responsible for compliance could void
the warranty and user’s authority to operate
the equipment.
Optimize your phone’s performance
(The measurements of use next to the body
differ according to the model phone, depending
on the accessories available and the
requirements of Anatel).
Use the guidelines on Blueage to learn how to
optimize the performance and life of your phone
and battery.
User Guide for the Kyocera K352 Phone
iii
Air bags
Potentially unsafe areas
If you have an air bag, DO NOT place installed or
portable phone equipment or other objects over
the air bag or in the air bag deployment area. If
equipment is not properly installed, you and your
passengers risk serious injury.
Posted facilities—Turn your phone off in any facility
when posted notices require you to do so.
Vehicles—RF signals may affect improperly
installed or inadequately shielded electronic
systems in motor vehicles. Check with the
manufacturer of the device to determine if it is
adequately shielded from external RF energy.
Medical devices
Pacemakers—Warning to pacemaker wearers:
Wireless phones, when in the ‘on’ position, have
been shown to interfere with pacemakers. The
phone should be kept at least six (6) inches away
from the pacemaker to reduce risk.
Blasting areas—Turn off your phone where
blasting is in progress. Observe restrictions, and
follow any regulations or rules.
Potentially explosive atmospheres—Turn off your
phone when you are in any area with a
potentially explosive atmosphere. Obey all signs
and instructions. Sparks in such areas could
cause an explosion or fire, resulting in bodily
injury or death.
The Health Industry Manufacturers Association
and the wireless technology research community
recommend that you follow these guidelines to
minimize the potential for interference.
Always keep the phone at least six inches (15
centimeters) away from your pacemaker when
the phone is turned on.
Areas with a potentially explosive atmosphere
are often, but not always, clearly marked.
They include:
Do not carry your phone near your heart. Use the
ear opposite the pacemaker. If you have any
reason to suspect that interference is taking
place, turn off your phone immediately.
fueling areas such as gas stations
below deck on boats
transfer or storage facilities for fuel or chemicals
Hearing aids—Some digital wireless phones may
interfere with hearing aids. In the event of such
interference, you may want to consult your
service provider or call the customer service line
to discuss alternatives.
vehicles using liquefied petroleum gas, such as
propane or butane
areas where the air contains chemicals or
particles such as grain, dust, or metal powders
any other area where you would normally be
advised to turn off your vehicle engine
Other medical devices—If you use any other
personal medical device, consult the
manufacturer of the device to determine if it is
adequately shielded from external RF energy.
Your physician may be able to help you obtain
this information.
Use with care
Use only in normal position (to ear).
Avoid dropping, hitting, bending, or sitting on
the phone.
In health care facilities—Turn your phone off in
health care facilities when instructed. Hospitals
and health care facilities may be using
equipment that is sensitive to external RF
energy.
Keep phone dry
If the phone gets wet, turn the power off
immediately and contact your dealer. Water
damage may not be covered under warranty.
iv
Resetting the phone
If the screen seems frozen and the keypad does
not respond to keypresses, reset the phone by
completing the following steps:
Remove the battery door.
Remove and replace the battery.
If the problem persists, return the phone to the
dealer for service.
Accessories
Use only Kyocera-approved accessories with
Kyocera phones. Use of any unauthorized
accessories may be dangerous and will
invalidate the phone warranty if said accessories
cause damage or a defect to the phone.
To shop online for phone accessories, visit
To order by phone, call 800-349-4188
(U.S.A. only) or 858-882-1410.
Radio Frequency (RF) energy
Your telephone is a radio transmitter and
receiver. When it is on, it receives and sends out
RF energy. Your service provider’s network
controls the power of the RF signal. This power
level can range from 0.006 to 0.6 watts.
Kyocera Wireless Corp.
10300 Campus Point Drive, San Diego, CA 92121
U.S.A.
Visit us at www.kyocera-wireless.com
User Guide for the Kyocera K352 Phone
v
CONTENTS
1
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . 1
8
9
Connecting to the Internet. . . . . . . . . . . . . . 33
Using the WAP Browser . . . . . . . . . . . . . . . . . . 33
Using the Music Player . . . . . . . . . . . . . . . . 35
Putting music files onto the phone . . . . . . . . . . 35
Accessing songs . . . . . . . . . . . . . . . . . . . . . . . . 35
Managing music player settings . . . . . . . . . . . . 36
Installing the battery . . . . . . . . . . . . . . . . . . . . . . 1
Removing the battery. . . . . . . . . . . . . . . . . . . . . . 1
Getting to know your phone . . . . . . . . . . . . . . . . 4
Main menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Using this guide. . . . . . . . . . . . . . . . . . . . . . . . . . 6
Performing basic functions . . . . . . . . . . . . . . . . . 7
Making and Answering Calls. . . . . . . . . . . . . 8
Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Answering calls. . . . . . . . . . . . . . . . . . . . . . . . . . 8
Speed dialing . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Setting up voicemail . . . . . . . . . . . . . . . . . . . . . 11
Calling emergency services . . . . . . . . . . . . . . . . 11
Customizing call settings . . . . . . . . . . . . . . . . . . 12
10 Accessing Multimedia Content . . . . . . . . . . 37
Accessing online games . . . . . . . . . . . . . . . . . . 37
Accessing pre-loaded games. . . . . . . . . . . . . . . 37
Accessing online sounds and images . . . . . . . . 37
11 Customizing Your Phone. . . . . . . . . . . . . . . 39
Accessing the main menu . . . . . . . . . . . . . . . . . 39
Setting your menu style. . . . . . . . . . . . . . . . . . . 39
Setting sounds for your phone . . . . . . . . . . . . . 39
Personalizing the screen. . . . . . . . . . . . . . . . . . 41
Choosing a different language. . . . . . . . . . . . . . 43
2
3
4
Entering Text, Numbers,
and Symbols . . . . . . . . . . . . . . . . . . . . . . . . . 14
Text entry modes. . . . . . . . . . . . . . . . . . . . . . . . 14
Quick reference to text entry. . . . . . . . . . . . . . . 16
Storing Contacts. . . . . . . . . . . . . . . . . . . . . . 17
Creating a new contact . . . . . . . . . . . . . . . . . . . 17
Editing or erasing a contact. . . . . . . . . . . . . . . . 19
Editing a phone number . . . . . . . . . . . . . . . . . . 19
Searching the Contacts directory. . . . . . . . . . . . 20
12 Using Voice Recognition . . . . . . . . . . . . . . . 44
Using voice memos. . . . . . . . . . . . . . . . . . . . . . 45
13 Utilities. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Calendar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Calculator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Stopwatch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
14 Configuring Your Phone . . . . . . . . . . . . . . . 48
Managing network settings . . . . . . . . . . . . . . . . 48
Creating a secure environment . . . . . . . . . . . . . 49
15 Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . 52
Customer support. . . . . . . . . . . . . . . . . . . . . . . 52
16 Using the Camera . . . . . . . . . . . . . . . . . . . . . 54
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
5
6
7
Sending and Receiving
Text Messages . . . . . . . . . . . . . . . . . . . . . . . 21
Sending text messages. . . . . . . . . . . . . . . . . . . . 21
Retrieving text messages . . . . . . . . . . . . . . . . . . 22
Customizing message settings . . . . . . . . . . . . . . 24
Sending and Receiving
Multimedia Messages. . . . . . . . . . . . . . . . . . 26
Sending multimedia messages. . . . . . . . . . . . . . 26
Receiving multimedia messages . . . . . . . . . . . . 27
Viewing multimedia messages. . . . . . . . . . . . . . 28
Managing Downloads. . . . . . . . . . . . . . . . . . 30
Downloading an application . . . . . . . . . . . . . . . 30
Opening an application. . . . . . . . . . . . . . . . . . . 31
Checking available memory . . . . . . . . . . . . . . . 32
vi
Contents
1
GETTING STARTED
3. Place your fingernail in
the recess provided at the
base of the battery
Installing the battery
Your phone comes with a rechargeable
850 mAh battery.
housing and lift the
battery out.
1. Hold the phone with the
back facing you and pull
downwards to slide the
battery cover open.
Charging the battery
2. Lift the cover off.
You must have at least a
partial charge in the battery
to make or receive calls.
Fully charge the battery
before using the phone.
3. With the metal contacts
pointing toward the
bottom of the phone,
insert the top of the
battery in the phone
To charge the battery, remove
casing, making sure the
plastic tabs slide into the
corresponding openings at the top.
the silicone strip covering the jack on the bottom
of the phone, connect the AC adapter to the jack,
and then plug the adapter into a wall outlet.
4. Press down on the battery until it clicks
The battery icon tells you whether the phone is:
into place.
•
•
•
Charging (the icon is animated)
Partially charged
5. Place the battery cover over the phone casing
and slide it upward until it snaps into place.
Fully charged
Removing the battery
1. Turn the cellular phone off.
After the battery charging is finished, if the cell
phone is in the power on state, then the screen
will show “Charge completed”.
2. Hold the phone with the back facing you and
slide the battery cover open.
User Guide for the Kyocera K352 Phone
1
Recharging the battery
Recharge the battery only when the power has
been depleted.
Note: Although the battery can be recharged, it
has a certain service life. When the battery has
been fully recharged but it lasts only for a short
period, replace the battery.
Caring for the battery
General safety guidelines
•
•
•
Do not take apart, puncture, or short-circuit
the battery.
If you have not used the battery for more than
a month, recharge it before using your phone.
Avoid exposing the battery to extreme
temperatures, direct sunlight, or
high humidity.
•
Never dispose of any battery in or near a
fire—it could explode.
Common causes of battery drain
•
•
•
Playing games.
Keeping backlighting on.
Operating in digital mode when far away from
a base station or cell site.
•
•
Using accessories.
Operating when no service is available, or
service is available intermittently.
High earpiece and ringer volume settings.
Repeating sound, vibration or lighted alerts.
•
•
2
Getting Started
Understanding screen icons
These icons may appear on your phone’s home screen.
Indicates MP3 is not available. MP3
music will not play when the handset is
in U-disk mode, a ringer or melody is
playing or MP3 player initialization is
not completed after powering up.
The phone is operating in IS2000 (1X)
digital mode.
The phone is receiving a signal. You can
make and receive calls. Fewer bars
indicate a weaker signal.
Indicates MP3 hard keys are locked
(any operation through these hard keys
will be disregarded). Press and hold
the camera key to unlock.
A call is in progress.
The phone is not receiving a signal.
You cannot make or receive calls.
Indicates MP3 hard keys are locked
after pressing and holding the camera
key while MP3 player is paused.
The phone is roaming outside of its
home service area.
You have a message.
Indicates MP3 is in pause state after
pressing MP3 pause key while MP3 is
playing.
The battery is fully charged. The more
black bars, the greater the charge.
Indicates MP3 hard keys are locked
after long pressing the camera key
while MP3 player is playing.
The alarm clock is set.
The phone is in privacy mode.
The phone is set to light up instead
of ring.
The phone is set to vibrate or to vibrate
and then ring.
Indicates MP3 player is on.
User Guide for the Kyocera K352 Phone
3
Getting to know your phone
1. Home screen.
2. Play/Stop key controls the MP3 Player.
3. Previous song key for listening to the previous song in
the playlist.
4. Left soft key enters or executes the main menu from
the home screen, or other functions as indicated on
the screen.
5. Send/Talk key starts or answers calls and accesses the
All Calls list.
6. Navigation keys scroll through lists, position the
cursor during text entry, or access the main menu
items to which you map them.
7. Keypad for entering numbers, letters, or symbols.
8. * key changes the text or symbol mode in text entry.
Locks the keypad.
9. 0 key adds a + needed for IDD dialing.
10. Jack for inserting charger or USB cable (included)*.
* Warning: Inserting an accessory into the incorrect jack will damage the phone.
11. Record/Pause key for recording voice memos or pausing the MP3 Player.
12. Next song key for listening to the next song in the playlist.
13. OK key selects a menu item or option.
14. Right soft key connects to the WAP browser from the home screen. This key often acts as a Back key,
but can function as indicated on the screen.
Note: In Downloads, this key acts as a Back key although there is no indication on the screen.
15. End/Power key turns the phone on and off. Ends a call.
16. # key press and hold to set the phone to vibrate mode. Adds a space when in text entry.
4
Getting Started
17. Jack for hands-free headset*
18. Camera key on the right side activates Camera mode
and can also be used to take the picture.
19. Mirror for taking your own picture.
20. Camera lens
21. Up and Down Volume control keys adjust the earpiece
or speaker volume or, in menu mode, scroll to select
menu options.
* Warning: Inserting an accessory into the incorrect jack
will damage the phone.
User Guide for the Kyocera K352 Phone
5
Main menu
The contents of the main menu are as follows:
Phonebook
Voicemail
Contacts
Memory Stat
Speed Dial
Information
Messages
New Message
Recvd Msgs
Sent Msgs
Voicemail
Msg Template
Svd Msgs
Drafts
Msg Settings
Downloads
Download Center
Settings
Tones & Images
MP3 Player
Images
Tones
Memory
DCF Files
Entertain.
Brick Attack
Online Games
Information
Utilities
Calendar
Help
Cust Care Center
Int’l Roam
Phone Info
Icon Glossary
Alarm Clock
Calculator
Voice Memo
Stopwatch
Timer
Settings
Network
Security
Call Settings
Msg Settings
WAP Settings
Date/Time
Orig Setting
Mode Setting
Camera
Capture
Settings
Camera Pictures
Last Picture
Memory Status
Calls
All
Missed
Received
Sent
Call Settings
Call Time
Erase
My Movistar
Main Keys
Menu Style
Sounds
Help
WAP
Home
Favorites
Go To...
WAP Options
Information
Voicemail
Display
Language
Silent Mode
Voice Dial
Key Guard
Navigating menus and options
•
From the home screen, press
main menu options.
to enter
Press
screen of text.
down to go to the next option or
•
Press
left, right, up, or down to view
Using this guide
In this guide, an arrow → tells you to select an
menus and options and to highlight one.
•
•
•
•
Press
Press
Press
or
to select a menu item.
option from a menu.
to back up a menu level or screen.
to return to the home screen.
For example, Menu → Messages tells you to
press the left soft key
to select Menu
In messaging, browser and downloads
screens, a scroll bar on the right side of
the screen indicates that there are more
options or text.
options, scroll up or down with the navigation key
to highlight the Messages option, and then
press
to select it.
6
Getting Started
Performing basic functions
To...
From the home screen...
Turn the phone on
Press and hold
Press and hold
until the phone powers on.
until the phone starts chiming.
Turn the phone off
Make a call
Enter the number, then press
.
End a call
Press
Press
Press
.
.
Answer a call
Access menu options
Access voicemail
.
Press and hold
. Follow the system prompts.
Verify your phone number information
Silence the ringer on an incoming call
Access the WAP browser
Access Tones & Images*
Access Calls*
Select
Press
Press
Press
Press
Press
Press
Select
Press
Menu → Help → Phone Info.
, then
.
to answer.
left.
up.
Access My Movistar*
Access Phonebook*
Take a picture
right.
down.
Menu → Camera → Capture.
. Press or to listen to the next or
Play a song
previous songs in the list. You must have music loaded onto
the phone. (See page 35.)
*See “Mapping your main keys,” on page 39 for information on mapping main menu items to the four navigation keys.
User Guide for the Kyocera K352 Phone
7
2
MAKING AND ANSWERING CALLS
Note: If the contact has more than one phone
number assigned to it, press to select the
contact’s name, highlight the phone number you
Making a call
1. Make sure you are in an area where a
signal can be received. Look for
home screen.
on the
want to call, and press
.
Note: The more bars you see in this symbol,
the stronger the signal. If there are no bars,
move to where the signal strength is better.
Answering calls
When a call comes in, the phone rings and a
phone icon appears on the screen. The phone
number of the caller also appears if it is not
restricted. If the number is stored in your
Phonebook directory, the contact name appears.
2. Enter the phone number.
3. Press
.
4. When you are finished, press
to end
the call.
To answer the call:
•
Press
incoming call.
or
to answer the
Redialing a number
To redial the last number called, received, or
missed, press twice.
To silence or ignore the call
When an incoming call is received, you can:
Calling a saved number
If you have already saved a phone number, you
can use the Contacts list to find it quickly.
•
Press
twice to reject the call.
Adjusting the volume during a call
To adjust the volume during a call:
1. Press
to select Menu → Phonebook →
Contacts → View All.
•
Press
up or down during a call to
adjust the volume.
2. Scroll down the list to find the contact you
want to call.
3. Highlight the name and press
to dial
the number.
8
Making and Answering Calls
Options during a call
Making conference calls
To initiate a 3-way conference call:
1. Call the first person (A).
While you are in a call, you can press
select from the following soft options without
interrupting your call:
to
2. Call the second person (B).
–
–
–
–
–
Contacts opens your Contacts list.
Messages opens the messages menu.
Mute/Unmute silences the current call.
Send DTMF enables the touch-tone option.
New Call allows you to dial and add
another caller to the current call.
Hand Free turns on the speakerphone.
Long DTMF allows you to switch between
long and short touch-tones.
(A will be on hold.)
3. Press
Tip: To return to a 2-way call from a 3-way call:
Press to hang up with B and
+
to connect all calls.
+
continue the call with A.
Important: The 3-way conference call function
varies depending on your service provider. Check
with your service provider for details.
–
–
–
–
End Call ends the current call.
Phone Info accesses information about
your phone.
Dealing with missed calls
When you have missed a call and the caller does
not leave a voicemail a “Notification” message
appears on the screen.
Call waiting
You can answer a call while you are in a call.
•
To clear the screen, press
to
select Back.
Important: Check with your service provider for
availability of this option.
•
To view details of the call:
–
Press
Highlight the missed call number
and press
To return the call, select View. Highlight the
missed call number and press
to select View.
•
•
•
•
Press
call and answer the second call.
Press to answer the call or to
switch between the calls.
+
or
to drop the first
–
.
+
•
.
Press
to select Ignore and ignore
to connect all calls in a
the call.
Press
+
3-way call.
User Guide for the Kyocera K352 Phone
9
–
–
–
–
Send SMS Allows you to send a text
message to the phone number.
Send MMS Allows you to send an MMS
message to the phone number
Erase Erases the phone number from
the list.
Recent calls
The recent calls list stores details on the last calls
you made, received, or missed. The following
icons identify the type of call:
Outgoing call
Missed call
Incoming call
Erase All Erases all the phone numbers
in the list.
Erasing recent calls
Viewing recent calls
1. Select Menu → Calls → Erase.
1. Select Menu → Calls.
2. Select a list: All, Missed, Received or Sent.
2. Select an option: All, Received, Sent
or Missed.
3. Highlight a recent call and press
to
select View.
Note: Select Information for a description of
this function.
Calling a recent call
3. Press
to select OK.
1. Select Menu → Calls.
2. Select a list: All, Missed, Received, or Sent.
3. Highlight a recent call and press
- or -
Speed dialing
Speed dialing allows you to quickly dial a stored
phone number. Use the digits keys 1–9 to
represent different telephone numbers.
Press
Option → Call.
thrice to select View →
Add a speed dialing number to an
existing contact:
Recent Call options
1. Highlight a recent call and press
twice
1. Select Menu → Phonebook → Speed Dial.
to select View → Options.
Choose an option:
2. Press
to select Set and enter the speed
dial number you want to use for your contact
- or-
–
–
Call Dials the phone number.
Save Adds the phone number to the
Press
twice to select Set → Search to
Contacts list.
look up a contact in the phonebook.
10
Making and Answering Calls
3. Select the contact you want and
press
Checking voicemail messages
.
When a voice message is received, your screen
displays “You have X voicemail(s)” along with the
symbol at the top of your screen. The symbol
flashes if the message is urgent.
4. Highlight the contact’s number to which you
want to assign the speed dial number and then
press
.
5. Press
two times. The speed dial list is
If you see “You have X voicemail(s)”
displayed again, showing the speed dial
location assigned to the contact.
1. Press
to select Options → Call to call
your voicemail number.
Using speed dialing
2. Follow the prompts to retrieve the message.
To call a contact that has a speed dial location:
To clear the screen without checking messages:
•
From the home screen, press and hold the
one-digit speed dial location.
•
Press
main menu.
to select Back and return to the
Note: If the digit key is not configured to
represent an existing contact number, then the
cell phone will display “No Speed #”.
Silencing an incoming call
•
To silence an incoming call quickly,
press
Setting up voicemail
•
Then press
to answer the call.
Before your phone can receive voicemail
messages, you must set up a password and record
a personal greeting with your service provider.
When you have set up your voicemail, all
unanswered calls to your phone are automatically
transferred to voicemail, even if your phone is in
use or turned off.
This action silences the current call only. The next
call rings as normal.
Calling emergency services
Note: Regardless of your 3-digit emergency code,
your phone operates as described below.
•
Dial your 3-digit emergency code and
press
1. From the home screen, press and hold
.
.
2. Follow the system prompts to create a
You can call the code even if your phone is locked
or your account is restricted. When you call, your
phone enters Emergency callback mode.
password and record a greeting.
Note: If you are having trouble accessing your
voicemail, contact your service provider.
User Guide for the Kyocera K352 Phone
11
This mode enables the emergency service
exclusive access to your phone to call you back, if
necessary. To make or receive regular calls after
dialing the code, you must exit this mode.
Customizing call settings
You can enable or disable various call settings on
your K352. These settings are available from:
Menu → Calls → Call Settings and/or
Menu → Settings → Call Settings.
To exit Emergency mode
When you have completed the emergency call:
Setting call waiting
1. Press
to select Exit.
You can enable or disable call waiting on your
phone. For more information, see “Call waiting”
on page 9.
2. Press
again to confirm your choice.
Tracking calls
You can track the number and duration of calls
made and received on your phone.
•
From Call Settings → Call Waiting, select one
of the following options:
–
–
Enable applies the call waiting feature.
Disable turns off the call waiting feature.
1. Select Menu → Calls → Call Time.
2. Press
to select a timer:
Setting call forwarding
–
–
–
–
Last Call tracks the last call you made
since you last reset this timer.
Received tracks incoming calls you have
received since you last reset this timer.
Sent tracks outgoing calls you have made
since you last reset this timer.
You can choose to forward all incoming calls
to your voicemail or a separate designated
phone number.
Important: Check with your service provider for
availability of this option.
To use this feature:
Life Time tracks all calls you have made
and received.
1. From Call Settings → Call Forward, select
one of the following options:
Timing your calls
–
–
–
Unconditional to forward all
incoming calls.
Busy to forward all incoming calls when
the line is busy.
No Answer to forward incoming calls
when there is no answer
You can set your phone to beep 10 seconds
before each minute that passes when you are
on a call.
Select Menu → My Movistar → Sounds →
Alerts → Minute Beep → Enable.
12
Making and Answering Calls
2. Press
to select:
–
Auto Answer allows the phone to answer
an incoming call automatically when using
a headset.
–
Enable Then, select Voicemail or To Phone
#. If you select To Phone #, you must enter
the telephone number to which you wish
to forward incoming calls.
Setting Auto Redial
You can set your phone to automatically redial a
number if you get a busy signal.
–
Disable turns off the selected call
forward setting.
•
From Call Settings → Auto Redial, select one
of the following options:
Setting call restriction preferences
You can choose to prevent incoming or outgoing
calls from your phone.
–
–
Enable applies the setting.
Disable turns off the setting.
1. From Call Settings → Call Restrcn, select one
of the following options:
–
–
Received restricts all incoming calls.
Sent restricts all outgoing calls.
2. Press
to select:
–
Enable applies the call restriction that
you choose.
–
Disable turns off the call
restriction setting.
Setting the phone to answer mode
You can set your phone to answer a call in
several ways.
•
From Call Settings → Answer Mode, select
an option:
–
–
Press Send sets the phone to answer as
soon as you press
Press any key sets the phone to answer an
.
incoming call when you press any key.
User Guide for the Kyocera K352 Phone
13
3
ENTERING TEXT, NUMBERS, AND SYMBOLS
You can enter letters, numbers, and symbols in
contacts, text messages, and your banner.
Entering words quickly
When you press a series of keys using EN, En or
en mode, the phone checks its dictionary of
common words and guesses at the word you are
trying to spell.
Text entry modes
There are six text entry modes:
•
•
•
•
Numbers only
1. Press and hold
to access EN (EN, En, en)
or SP (SP, Sp, sp) mode.
Normal alpha ABC, abc, Abc
Rapid Entry EN (EN, En, en) or SP (SP, Sp, sp)
Add Symbols
2. For each letter of the word you want, press the
key once. For example, to enter the word
“uma” press:
→
→
.
Note: The mode you start in depends on the task
you are doing. For example, when entering a phone
number, you’re in number mode. When entering a
name for a contact, you’re in normal text mode.
3. If the word doesn’t match what you want,
press
Press
right to look at other word matches.
left to go back a word.
4. When you see the word you want, press
.
Entering numbers
Entering symbols
•
To enter a number while in
press a number key once.
mode,
While entering text, you can enter symbols by
pressing
, such as:
Entering words letter by letter
.
&
@
,
1
‘
:
?
Use normal alpha to enter letters.
For entering more symbols:
•
Press a key once for the first letter, twice for
the second letter, and so on. Accented letters
are available.
1. Press
to select Options → Insrt Sym.
2. Press
to scroll through the list.
3. Press the corresponding number key for the
symbol you want.
14
Entering Text, Numbers, and Symbols
Changing modes
Sometimes you need to change modes.
For example, to enter numbers in an email
address while in ABC mode, you must change to
123 mode, enter the numbers, and then change
back to ABC mode to complete the address.
To change text entry modes:
•
Press
until the icon for the mode you
want appears.
Capitalization settings
You can change capitalization at any time while
entering text. Press (but do not hold)
to choose upper case (ABC), sentence case
(Abc) or lower case (abc) while in Normal Alpha
mode.
User Guide for the Kyocera K352 Phone
15
Quick reference to text entry
This table gives general instructions for entering letters, numbers, and symbols.
To...
Do this...
Enter a letter
Use ABC mode and press a key until you see the letter
you want. For more information, see page 14.
Enter a number
Enter a symbol
Use 123 mode and press a key once to enter its number.
For more options, see page 14.
Press
to select Options → Insrt Sym. Press
up or
down to find the symbol you want, then press the key
corresponding to the number for the symbol.
Enter a space
Press
Press
.
Erase a character
.
Erase all characters
Press and hold
.
Move the cursor right or left
Move the cursor up or down
Change text entry modes
Capitalize any letter
Press
Press
right or left.
up or down.
Press and hold
.
In abc mode, press
In ABC mode, press
. Choose ABC.
Lowercase any letter
Use sentence case
. Choose abc.
In ABC or abc mode, press
Press or
. Choose Abc.
Select soft options on the screen
.
16
Entering Text, Numbers, and Symbols
4
STORING CONTACTS
Use your phone’s Phonebook to store information
about a person or company in the contacts
directory. Your phone can hold, on average,
approximately 500 phone numbers.
7. To save, press
to select Options →
Save. To add more information, see “Adding
more contact information” on this page.
Adding more contact information
1. Locate the contact you wish to edit. See
“Searching the Contacts directory” on
page 20.
Creating a new contact
1. Select Menu → Phonebook → Contacts →
Add New.
2. Highlight the contact’s name and press
.
Note: To save a contact after entering the
number on the home screen, enter the phone
number you want to save including the area
code, then select Options → Save Number,
and skip to step 3.
3. Highlight the type of information you wish to
modify. The options are:
Name
Group
2. Select Options → Edit.
3. Enter the name of the contact. If you need to
URL
Mobile
learn how to enter letters, see page 14.
Work
Memo
Address
Fax
4. Press
Save and exit.
5. To add numbers to a contact, press
to select the type of number: Mobile, Work,
to select Options →
Home
down
to
Email 1
Email 2
Home, E-mail, or URL, and press
select Options → Edit.
6. Enter the contact’s number and press
to
4. Press
to select Options → Modify.
select OK.
5. Enter the contact’s information and press
Note: You can choose to save now or add
more information.
to select Options → Save and exit.
6. Press
and select Options → Save.
User Guide for the Kyocera K352 Phone
17
Adding a code or extension
Adding a contact to a group
When you save the phone number of an
automated service, you may include a
pause where your phone would stop dialing;
for example, where you would wait to dial
an extension.
You can classify a contact into a group list.
1. Locate the contact you wish to add. See
“Searching the Contacts directory” on
page 20.
2. Highlight the contact and press
.
Note: You can also choose to insert a Time pause
to stop dialing for two seconds and then continue.
3. Select Group Default and press
Options → Modify.
4. Select your desired group from the list and
to select
1. Enter the first portion of the phone number.
2. Press
to select Options:
then press
.
–
–
Hard Pause, P will appear.
Time Pause, T will appear.
5. Press
to select Options → Save.
Creating groups
3. Enter the remaining numbers.
4. Press to select Options →
Save Number.
You can create and save additional custom
group lists.
Note: The maximum number of recipients in all
the lists combined is 500.
5. Enter the contact’s name and press
to
select Options → Save and exit.
1. Select Menu → Phonebook → Contacts →
6. Press
this contact, or press
Options → Save.
down to add more information to
Groups.
to select
2. Press
to select Option → Add New.
3. Enter a name for the list. For help entering
text, see “Entering Text, Numbers, and
Symbols” on page 14.
Organizing contacts
You can organize your contacts by placing them
either in the available group lists or in custom
groups that you can create.
4. Press
to select Save and Exit.
18
Storing Contacts
The choices are:
Group options
–
–
–
–
Modify make changes to the selected item.
Save save the contact record.
Erase erase the entire contact.
Send SMS send a text message to
the contact.
You can manage your groups by assigning icons,
ringers, renaming or deleting them.
1. Select Menu → Phonebook → Contacts →
Groups.
2. Select the group list that you want and press
–
Send MMS send a multimedia message to
the contact. (This option is available when
a contact number or email address is
highlighted).
Add Voice record a voice dial tag.
Select Picture add a picture to the contact.
Launch Web access the contact’s
designated URL
to select Options.
3. Choose an option:
–
–
–
–
–
–
List view the contacts in the selected
group list.
Icons change the icon of the selected
group list.
Ringer assign a ringer type to the contacts
of the selected group list.
Rename* change the name of a group list
that you have created before.
Add New create a new name for the
selected group list.
–
–
–
–
Ringer assign a ringer to the contact.
4. Highlight an option and press
to select it.
5. After completing all selections and edits, press
to save.
Erase* erase a group list that you have
created before.
Editing a phone number
1. Select Menu → Phonebook → Contacts.
2. Locate the contact to edit and press
3. Press down to select the number you
want to modify and press to select
Options → Modify.
Note: Press left or right to skip a digit
Note: *These options are available only for
groups that you have created; pre-listed
groups cannot be deleted or renamed.
.
Editing or erasing a contact
To make changes to a contact, take these steps:
1. Select Menu → Phonebook → Contacts →
of the phone number. Press
a digit.
to erase
Search.
2. Locate the contact to edit and press
3. Press to select Options.
.
4. Press
5. Press
to select OK.
or select Options → Save.
User Guide for the Kyocera K352 Phone
19
–
Send MMS send a multimedia message
to the contact. (This option is available
when a contact number or email address
is highlighted).
Add Voice to add a voice dial tag for
this contact.
Select Picture to assign a photo to
this contact.
Launch Web to launch the contact’s
web page.
Searching the Contacts
directory
To view contacts quickly:
1. Select Menu → Phonebook → Contacts →
–
–
–
–
View All.
2. Scroll down the list until you locate the
contact you want.
To search for a particular contact by name,
number or group:
1. Select Menu → Phonebook → Contacts →
Ringer to assign a ringer to this contact.
Search.
Note: To call the contact, highlight a phone
number and press
2. Select the type of search, enter the search
.
information and press
to select OK.
The options are:
–
–
–
Name Search enter the name, or first few
letters of the contact’s name.
Number Search enter the contact’s phone
number.
Group Search highlight the group name.
3. Scroll until you find the name you want, then
press
.
Contact Options
The following options are available when you
select a contact and press
:
–
–
–
–
Modify to edit the highlighted information.
Save to save the contact information.
Erase to erase the contact information.
Send SMS to send a short text message.
20
Storing Contacts
5
SENDING AND RECEIVING TEXT MESSAGES
This chapter describes how to send, receive, and
erase text messages from your phone. For
information on voicemail messages, see page 11.
–
–
Send to send your message. See step 4.
Insert Template to insert pre-written text in
your message.
–
–
–
–
Save to Drafts to save the message in your
Drafts folder.
Save to Saved to save the message in your
Important: The features and menus described in
this chapter may vary depending on services
available in your area. In addition, usage charges
may apply to each message. For details, check
with your service provider.
Saved messages folder.
Insrt Sym to select a symbol from the
symbols list and insert it into the message.
Enter Number to select a phone number in
the Contacts directory and insert it into the
message.
Insert Mode to select a text entry mode for
entering the message. See Chapter 3 on
page 14.
Sending text messages
Enter the recipient's number or search for the
recipient's number in the Contacts directory to
send the message. It can be sent to a group of up
to 30 phone numbers simultaneously. You can
only send text messages to phones that are
capable of receiving them.
–
–
–
Priority to select normal or urgent priority.
Back to return to the New Message menu
without saving.
Creating a new text message
4. If you select Send, you are taken to the
Receiver screen to enter your contact’s
phone number.
1. Select Menu → Messages →
New Message → New SMS.
Note: Select the Information option for a
description of this feature.
–
Press
to select Search. Highlight the
. If the
contact’s name and press
2. Enter the text message.
contact has multiple phone numbers, you
also need to select the number you want
Note: To add prewritten text, select
Options → Insert Template. Press
down to choose your prewritten text and then
press to add the text to the message.
3. Once you have completed the message,
press to select Options.
up or
and press
.
5. To add another recipient to this message,
scroll to the next line in the Receiver screen
and repeat step 4.
Select one of the following:
User Guide for the Kyocera K352 Phone
21
Note: You can send a message to up to 30
contacts at once. The messages are sent one at
a time, once to each recipient.
A list of all your received messages appears.
indicates a new, unread message.
indicates a read message.
6. When you have completed entering recipients,
2. Press
list of messages.
3. Press to select Read. The message is
displayed.
up or down to scroll through the
press
to select Send.
Receiving incoming calls while
creating messages
•
When you receive a call the phone will return
to the home screen. If you don’t want to
Reading the message
Note: The options available to you may vary.
Check with your service provider.
answer the call, select
. The message
is saved and you can return to the
message screen.
1. If the text message is long, press
down to
•
To answer the call, press
finish the call, press
saved in the Drafts folder and you can return
. When you
. The message is
view the entire message.
2. When you have finished viewing the message,
you can select from the following Options:
to the home screen.
–
–
Reply to reply to the sender.
Reply With Copy to reply to the sender
and copy.
Retrieving text messages
When a text message is received, your screen
displays “X New Message(s)”, along with the
symbol at the top of your screen.
–
–
–
Forward to forward the message.
Erase to erase the message.
Erase All to erase all the
unprotected messages.
If you see the “X New Message(s)” note
–
–
Call Back to call the sender of the message.
Save Numbers to save the sender’s phone
number in your Contacts list.
Save to Saved to save the message to the
Saved messages folder.
Extract URL to extract the URL.
Protect to prevent the message from
being accidentally deleted. The Unprotect
option is available when the message is
already protected.
You can view the message by pressing
or ignore the message by pressing
return to the main menu.
,
and
–
If you see the
symbol
symbol flashing, the message
–
–
If you see the
is urgent.
1. Select Menu → Messages →
Rcvd Messages.
22
Sending and Receiving Text Messages
3. Follow the prompts depending on your
–
Status to view the status of the message
and any error messages. (This option
appears when there is an error or
message that could not be sent.)
selection above.
Viewing messages
You can view, save, protect or delete messages
stored on your phone in the Sent, Saved and
Drafts folders.
Creating and editing prewritten
messages (Templates)
1. Select from the following message lists:
Your phone comes with prewritten (Template)
messages, such as “Please call me back,” that
you can insert into the body of a text message.
You can create new ones. Your phone stores up
to 22 Auto Text messages, with up to 160
characters per message.
–
–
–
To access the Sent messages list, select
Menu → Messages → Sent Msgs.
To access the Saved messages list, select
Menu → Messages → Svd Msgs.
To access the Drafts folder, select
Menu → Messages → Drafts.
To create or edit templates:
2. Press
up or down through the list
1. Select Menu → Messages →
of messages.
Msg Template → SMS.
3. Press
to select Read. The message
2. Highlight a template and press
twice to
details are displayed.
select OK and then make your edits.
4. Press
to select Options.
3. Press
an option.
and then press
to select
Your options are:
–
Send allows you to enter a recipient’s
number, or press in the Receiver
–
Forward to send the message to
another recipient.
screen, to select Search and enter a
recipient from the Contacts list.
Save to Draft allows you to save your text
message in your draft folder.
Enter Number allows you to include a
phone number in your message.
Insert Template allows you to insert a
pre-written template.
–
–
Erase to delete the message.
Erase All to delete all the
unprotected messages.
Save to Saved to save the message to the
Saved messages folder.
Protect to protect the message from
being accidentally deleted. The Unprotect
option is available when the message is
already protected.
–
–
–
–
–
User Guide for the Kyocera K352 Phone
23
–
–
Insert Mode accesses the templates list
where you can select another template to
insert in the current one.
Modify saves the modified template in the
templates folder.
Setting message alerts
You can set your phone to alert you of incoming
text messages or pages. For more information,
see “Setting message alerts” on page 41.
Outgoing message settings
From the Msg Settings menu, select
Note: For help entering text, see page 14.
•
Outgoing. The following options are available:
Customizing message settings
To make messaging easier, you can customize
settings for sending and receiving messages.
You can enable or disable various message
settings on your K352. These settings are
available from:
–
–
–
Priority set normal or urgent priority for
your outgoing messages.
Delvry Notic enable this option to receive
notification of message delivery.
Saved Msgs choose whether to save your
outgoing messages to the Saved Messages
folder, or to be prompted to save when
you send a multimedia message.
•
Menu → Messages → Msg Settings.
and
•
Menu → Settings → Msg Settings.
–
–
Call Back enter a call back number to
include with the message to let
recipients know at what number they
Incoming message settings
•
From the Msg Settings menu, select
can call you back.
Incoming. The following options are available:
Signature enable this option to include
your signature in all outgoing messages.
See “Adding your signature” on this page.
–
Auto Erase when the total number of
messages reaches 200, this enables the
phone to receive a new message by
deleting the oldest message. (The erase
order proceeds from Sent, Drafts, Saved
and Inbox lists).
Adding your signature
The signature you create is included at the end of
outgoing messages when the signature option is
enabled. See “Incoming message settings” on
page 24. However, it does not appear in the
message creation screen.
–
–
Reminder choose how often you wish to
be alerted of incoming messages. Select
Off to disable this option.
Auto Retrieve enable this option to
automatically receive and download text
and multimedia messages.
To create a signature:
1. Select Menu → Messages →
Msg Settings → Signature.
24
Sending and Receiving Text Messages
2. Enter your signature in the Content field.
3. Press to select OK → Save and Exit
Erasing single messages
1. Select Menu → Messages.
Note: The characters in the signature are
included in the total character count of
the message.
2. Press
down to the type of message you
want to erase: Recvd Msgs or Sent Msgs.
3. Highlight the message to erase and press
to select Read.
Setting the insert mode
4. Press
to select Options → Erase. A
notification appears: “Erase?”
You can set the initial text entry mode for
messaging. This mode can be changed in a text
entry screen by pressing the
page 14 for more information.
5. Select OK to erase the message.
key. See
Erasing all messages
1. Select Menu → Messages →
1. Select Menu → Messages →
Msg Setting → Insert Mode.
Msg Settings → Erase Msgs.
2. Highlight the mode you want and press
2. To erase messages from all folders select
to set it.
All Messages.
-or-
Checking available memory
3. Select a folder to erase all messages from just
To check available memory, select Menu →
Messages → Msg Settings → Memory and select
a folder. The number of used messages
is displayed.
that folder:
–
–
–
–
–
Recvd Msgs
Sent Msgs
Msg Template
Svd Msgs
Drafts
Erasing messages
Your phone is designed to store 200 text
messages. It’s a good idea to erase old messages,
as messages take up memory in your phone.
You have the option of erasing text messages as
you send or read them, erasing them one at a time
from the lists in the Received Box, Sent Box,
Message Templates, Saved Messages or Drafts, or
erasing them all at once.
Note: Select the Information option for a
description of this feature.
4. A message appears: “Erase?” Select OK to
erase messages or Back to cancel.
User Guide for the Kyocera K352 Phone
25
6
SENDING AND RECEIVING MULTIMEDIA MESSAGES
–
Press
to select Options →
Sending multimedia messages
Contacts to access your contacts
directory; and then press
the number or e-mail address.
Press
You can only send multimedia messages to
phones that are capable of receiving them or to
email addresses. For details, check with your
service provider.
to insert
–
when you are done.
4. Press
down to the CC and BCC fields and
to select Options → Edit to add
Multimedia messages have a predetermined
character and file size limit. When you reach the
character and file size limit for a single
multimedia message, you must edit the message
to meet the size limitation.
press
additional recipients:
5. Press
down to the Subject field and
to select Options → Edit to enter
when you are done.
press
text. Press
6. Press
and press
Note: Multimedia message file size limits
may apply. For details, check with your
service provider.
down once to enter the Picture field
to select Options. Press
when you are done.
The options are:
Creating a multimedia message
1. Select Menu → Messages →
–
–
Send to send the message.
New Message → New MMS.
Take photo to instantly take a new photo
and attach it to your message.
Album to select a photo from the camera
photo album.
Images to select from images stored on
the phone.
Preview to play your multimedia message
prior to sending.
Save message to save the message
Note: Select the Information option for a
description of this feature.
–
–
–
–
2. Enter the recipient’s phone number or email
address in the To field.
3. To add more recipients:
–
Press
enter a recipient.
to select Options → Edit to
–
Press
down to enter additional
recipients manually,
- or -
26
Sending and Receiving Multimedia Messages
–
Send Setting to choose the settings for the
message. The options are:
Priority- Normal or Urgent
Delvry Notif- Enable or Disable
Saved Message- Save, Not Save or Prompt.
Add slide and Remove slide to add or
remove a slide.
Name Card to add a Name Card to
the message.
–
–
–
Voice to access voice notes on your phone
Recording to record a new voice memo
Preview to play your multimedia message
prior to sending.
Save Message to save your multimedia
message to the Drafts or Templates folders
and send it later.
Send Settings to choose the settings for
the message. The options are:
Priority Normal or Urgent
–
–
–
–
–
DCF to add a DCF file to the message.
Delivery Notif Enable or Disable
Saved Message Save, Not Save or Prompt.
Add slide and Remove slide to add or
remove a slide.
Name Card to add a Name Card to
the message.
Note: You can add only one picture per
slide. Up to three slides are allowed per
multimedia message.
–
–
–
7. Press
down once to enter the
Message field.
–
–
Enter your message manually, or
DCF to add a DCF file to the message.
Press
to select Options → Edit and
9. When you have completed entering your
enter the message. Press
access to quick text.
again for
message information, press
to
select Send.
–
Press
when you are done.
10. Press
to send your multimedia message.
again at the prompt to save your
8. Press
field and press
Choose from:
down once to enter the Sound
to select Options.
11. Press
multimedia message
–
–
–
Send to send the message.
Receiving multimedia messages
There are various settings for receiving a
multimedia message on your phone.
Preloaded sounds already in your phone
Sound to access your downloaded tones
and music.
Note: See “Customizing message settings” on
page 24 for more information on settings for
incoming and outgoing messages.
Note: You can add only one new or stored
sound per slide. Up to three slides are allowed
per multimedia message.
User Guide for the Kyocera K352 Phone
27
Auto Receive mode
Viewing multimedia messages
When a multimedia message is received, it is
automatically downloaded onto your phone.
When you receive a multimedia message, a
notification appears on your phone’s screen and
remains until all messages are viewed.
The alert “New Message(s)” appears along with
the text “Message Received. View now?”
1. Press
If the message is long, press
the entire multimedia message.
2. Press to select Options. Press
to highlight additional options for the
to View the multimedia message.
down to view
•
•
To View the multimedia message, press
To view Later, press
.
.
down
Note: In idle state, the phone downloads the
message approximately one minute after the last
key is pressed.
multimedia message (options vary according
to selection):
Reminder mode
Note: The options available to you may vary.
When a multimedia message is received, your
Check with your service provider.
screen displays the alert “New Message(s)” along
with the question “Retrieve Now?”
–
–
Reply reply to the sender.
Reply All reply to all recipients of
the message.
Forward launches the message creation
screen, allowing you to forward the
multimedia message. The original address
will not be shown, nor will the graphic,
sound, and text fields.
•
•
To View the multimedia message, press
.
Select Erase to never download the
–
multimedia message.
•
To view Later, press
.
Note: If a multimedia message is received during
a call, then the phone screen displays the alert
“New Message(s)” after the call ends.
–
–
–
Call Back initiates call to the sender of the
multimedia message.
To activate a message alert:
Save Message saves the multimedia
message to the Saved folder on the phone.
Save Image saves the currently
viewed picture embedded in the
multimedia message.
1. Select Menu→ Messages → Msg Settings →
Incoming → Reminder.
2. Highlight an option to be alerted of
incoming messages:
–
–
Once Only or Evry Two Min, or
Off not be alerted of incoming messages.
–
Save Sound saves the current sound
embedded in the multimedia message.
3. Press
.
28
Sending and Receiving Multimedia Messages
–
–
Delete allows you to erase the currently
displayed multimedia message.
Message Info displays multimedia
message information (priority, sender,
subject, time sent and received, and
message size).
–
Protect protect the message to avoid
accidentally erasing it.
User Guide for the Kyocera K352 Phone
29
7
MANAGING DOWNLOADS
Your K352 has the ability to download and
manage applications through Downloads.
Downloading an application
1. From the home screen, select Menu →
Tip: As you navigate the screens in the Downloads
Downloads.
menu, use
to go back one menu level.
2. Select Download Center. Download Center is
your link to downloading applications.
For more information
When a connection to the server is made, the
Downloads Center menu appears with a list of
application types to choose from.
For more information about Downloads
capabilities and application pricing, contact your
service provider.
3. Select an application type.
How do Downloads work?
A full list of applications of the type you
selected appears. New applications are
indicated by an arrow on the left.
You connect to the server, download applications,
and then manage them as you like. When you
choose an application, you have the option of
choosing a demo, various limited use options, or
the full version—all varying in price. If you
choose a demo, Downloads lets you know when it
has expired. If you choose a priced version, the
amount is added to your phone bill. Downloads
also lets you know if you’re running out of
memory. At that point, you can either disable an
application or remove it completely.
Note: Long titles scroll left as you
highlight them.
4. Select an application.
A list of usages appears.
There may be one or more usages available.
The costs are specified for each.
5. Select a usage.
You are then prompted by a message asking
you to confirm your choice.
Once applications are loaded, you can update to
newer versions as they become available.
6. Select Yes to confirm.
The application is downloaded to your phone.
Note: Download times vary.
Changing the airtime charges alert
To be warned of airtime charges when you access
the internet, select Menu → Downloads →
Settings → Airtime Warnings → All Enabled.
30
Managing Downloads
7. To open the application now, select Yes. If
you choose No, you return to the
Downloads menu, where you see a link to
your new application.
Viewing application details
You can get information about the size of an
application and how many uses it has left before it
runs out.
Note: Your connection to the application
server automatically ends after a short
period, unless you connect again to
download more applications. If you want to
end the connection manually, press
on your phone.
1. Select Menu → Downloads → Settings →
Manage Apps.
2. Select the application you want details for.
Removing an application
Important: If you remove an application, it is
removed completely from your phone. If you want
to use it again, you must pay for it again. If you
want to free up space on your phone, we
recommend you disable the application (see next
section).
Options after downloading
The following options appear after you receive a
prompt indicating that you have successfully
downloaded content.
–
Yes select this option to run the
application.
1. Select Menu → Downloads → Settings →
Manage Apps.
–
No select this option to return to the
Downloads Center screen.
2. Select the application and then select Remove.
3. Select Yes to confirm your choice.
Opening an application
Disabling an application
Downloaded applications are stored under the
Downloads menu. Each application comes with its
own unique icon, to help you identify it easily.
If you are running out of memory and would like
to download more applications, but do not want
to completely remove those you have paid for, you
can simply disable them. This means you have to
re-download an application in order to use it
again, but don’t have to pay for it again.
1. Select Menu → Downloads.
Note: The Downloads icon always remains at
the top of this menu. Downloaded
applications are listed after.
2. Highlight and select the icon for the
application you want to open.
User Guide for the Kyocera K352 Phone
31
Locking an application
To prevent disabling an application, you need to
first lock an app.
1. Select Menu → Downloads → Settings →
Manage Apps.
2. Select the application and then select
Lock App.
3. Select Yes to confirm your choice.
Note: The app is still listed in the Downloads
menu. The icon looks like an empty box.
Checking available memory
The amount of available memory depends on the
number of applications you downloaded.
Select Menu → Downloads → Settings →
Manage Apps.
•
System Info is already highlighted. The
amount of memory left is shown at the bottom
of the screen.
•
To get more detailed memory information
select System Info. The System Info screen is
displayed with further information.
32
Managing Downloads
8
CONNECTING TO THE INTERNET
–
–
An underline and an arrow indicate that
there is more text. Press down to view
to return to the
Using the WAP Browser
You can use your phone to browse the Internet if
you have obtained phone Internet services from
your service provider and if over-the-air Internet
access is available in your area.
more text. Press
previous screen.
To choose a site, highlight it and press
to select Go.
Note: You cannot receive incoming calls while
you are using the WAP Browser.
4. When you have finished using the Internet,
press
to exit the browser.
Starting the WAP Browser
WAP menu
1. From the home screen, press the right soft key
The Wap menu contains the following options:
to select WAP.
–
–
Home accesses the WAP home page.
Favorites accesses the page containing
your saved web sites.
Note: For information about how airtime is
charged, contact your service provider. To
change this alert see “Changing the airtime
charges alert” on page 30.
–
–
Go To... takes you to a WAP Browser URL
that you specify.
2. Press
to continue.
WAP Options lists the alerts for managing
your Web use. Web prompt alerts you at
the beginning or end of every browser
session; and a Session timer provides
alerts at 60. 90, 120, or 150 seconds of
browser use.
If this is the first time you have connected
to the Internet, a message informs you
that security is not yet enabled for your
Web Browser.
3. Press
to select Yes to enable security.
When you are connected, a WAP home
page appears. It has a list of bookmarks and
some Web menu options at the bottom of
the screen.
–
Information provides a description of the
WAP options.
–
A
appears in a secure session.
User Guide for the Kyocera K352 Phone
33
Options menu
Searching for a Web site
As you browse through the internet, you have
several options available from the Options menu.
How you search for a Web site depends on your
service provider. For more information, contact
your service provider.
•
Select WAP → Menu → Options.
The options are:
Going to a bookmarked site
–
–
Back takes you back to the previous page.
Forward takes you to the next page
indicated by your current page.
Home returns you to the main Web
Browser window or home page.
Go to URL takes you to the URL that
you specify.
1. Select WAP → Favorites. If you see a message
prompt, press
- or -
to continue.
–
–
Select WAP → Menu → Options →
Bookmarks List. A list of bookmarks appears.
2. Enter the number that corresponds to the
bookmark you want and press
.
–
–
Show URL displays the entire URL.
Search accesses the browser’s
search function.
–
Mark Page saves the current location as a
bookmark for easy access.
–
–
Refresh refreshes the current page.
Favorites List displays a list of your saved
Web sites.
–
–
Save Page takes you to a saved page.
Saved Page List takes you to a list of your
saved pages.
–
–
–
–
History List clears the history.
Preferences
Restart Browser restarts the Web Browser.
About NetFront displays information about
your Web Browser version.
–
Exit WAP exits the browser and takes you
back to the Menu.
34
Connecting to the Internet
9
USING THE MUSIC PLAYER
Use your phone’s music player to listen to your
favorite songs. Copy music files from your
computer to your phone for your own portable
music player.
7. Double-click on the appropriate Removable
Disk drive.
8. Double-click on the Music folder.
9. Drag and drop your music files onto the Music
folder in the removable disk drive.
Note: The K352 supports only the mp3 music
file type.
Putting music files onto
the phone
Music files can be put onto your K352 by using the
provided USB cable and placing the K352 into
Mass Storage Mode.
10. When you are done placing music onto the
K352, disconnect it from your computer.
Note: The K352 supports music files in the MP3
format only.
Accessing songs
Playing songs
1. On the phone, select Menu → Settings →
1. Press
.
Mode Setting → Mass Storage Mode.
-or-
2. Plug the USB cable into the jack at the bottom
Select Menu → Tones & Images →
MP3 Player.
of the K352.
3. Plug the other end of the USB cable into a USB
port on your computer.
4. Your K352 will now be ‘viewed’ by your
2. Press
Note: The MP3 Player icon
on the top row of your phone screen.
to listen to the displayed song.
is displayed
computer as a ‘Mass Storage Device’.
3. Use the
and
keys to play the next and
Note: Your phone will not be recognized by
the computer as a Mass Storage Device unless
you change the mode to the Mass Storage
setting before you connect to the computer as
described in step 1.
previous songs in the list.
4. To skip directly to a different song:
–
–
Press
Press
and select List.
up or down to scroll through
the list.
5. On your computer double-click on
‘My Computer’.
6. You will see the K352 as a Removable
–
Highlight a song, press
and
select Play.
disk drive.
User Guide for the Kyocera K352 Phone
35
Tip: Use the
and
keys on the left side of
1. Select Menu→ Tones & Images →
MP3 Player.
the phone to adjust the volume when the music is
playing. Press
resume it.
to pause a song and
to
2. Press
3. Highlight List and press
4. Choose an option from the Settings menu:
to select options.
.
Saving songs to the playlist
You can select songs to the playlist and play just
those songs on your phone.
–
–
–
–
–
Sound Effect assigns a sound effect to the
selected song.
Repeat keeps repeating the selected song
or stops the selected song from repeating.
Random plays the songs in your playlist in
a random order.
Volume adjusts the volume of the
music player.
Skin changes the appearance of the music
player screen.
1. Select Menu → Tones & Images →
MP3 Player
2. Press
3. Highlight List and press
4. Highlight the song you wish to select and
press
to select options.
.
.
5. Highlight Select Play and press
to select
the song for the playlist.
6. Scroll through the list and press
continue selecting songs to the playlist.
7. When you have completed your selection,
to
Troubleshooting
Scenario: Song is not playing
Try renaming the file on your PC, removing any
special characters, spaces, and limiting the length
to 20 characters long.
press
“Save to playlist?” will appear.
8. Select to save your selections to
to select Back. The message
If the file still does not play:
the playlist.
•
•
The file type may not be supported.
The file may be DRM (digital rights
management) protected.
Note: The next time you use the
keys the songs selected to the playlist will play.
and
Managing music player settings
You can set personal preferences for skins and
play options in your music player.
•
The file may be corrupted.
Scenario: Audio is choppy
•
The audio file may be corrupted, but the
audio still plays. Check your audio file
for corruption.
To access the music player settings:
36
Using the Music Player
10 ACCESSING MULTIMEDIA CONTENT
The Entertain. menu on your phone gives you
access to online and preloaded games. You can
also purchase, download, store, and access
other online multimedia content from the
Tones & Images folder in your phone.
–
To exit the game, highlight Exit and
press
.
Accessing online sounds and
images
Note: See “Using the Music Player” on page 35
for more information on the MP3 player.
You can download and store sounds and images
to the Tones & Images folder on your phone for
easy access.
Accessing online games
To access online games from your phone:
Note: You will not be able to use downloaded files
that are DRM protected until the DRM rights
arrive. See “Using DRM protected content” on
page 38 for more information.
•
Select Menu → Entertain. → Online Games.
Note: Select the Information option for a
description of this feature. Contact your service
provider for more details.
•
To access an online site where you can
download sounds select Menu →
Tones & Images → Tones → More Tones.
Accessing pre-loaded games
•
To access an online site where you can
download images select Menu →
Tones & Images → Images → More Images.
Brick Attack
Your K352 comes with a pre-loaded game
called Brick Attack. The goal of this game is to
eliminate bricks arranged in levels. You send a
moving ball upward using a paddle at the
bottom of the screen.
After you have downloaded sounds or images, you
can access them as follows:
•
To access stored sounds, select Menu →
Tones & Images → Tones → Saved Tones.
•
To access stored images, select Menu →
Tones & Images → Images → Saved Images.
1. Select Menu → Entertain → Brick Attack.
2. Press
to select New.
To check the used and available memory in the
Tones & Images folder:
–
To pause the game, press
to Resume.
To move the paddle, press
, then press
left or right.
•
Select Menu → Tones & Images → Memory.
–
User Guide for the Kyocera K352 Phone
37
Using DRM protected content
Setting incoming alerts
You will not be able to use downloaded files that
are DRM protected until the DRM rights arrive.
DRM protected Separate Delivery contents are
stored in the Menu → Tones & Images →
DCF Files folder. Once decrypted, the content is
stored in the corresponding folders in
Tones & Images.
You can set specific tones to be alerted of
incoming messages from your
Tones & Images folder.
1. Select Menu → Tones & Images → Tones →
Incmng Alrts.
2. Highlight a tone to listen to it and press
to select it.
To decrypt DRM Content Files:
1. Select Menu → Tones & Images → DCF Files.
2. Highlight a DCF File and press
to select
Options.
The options are:
–
Send MMS send this content in an MMS
message.
–
Use follow the prompts to purchase rights
and use the file.
You may receive a WAP message “New
rights received. Use it in DCF Folder?”
select Yes to decrypt the file and use it.
Note: Once decrypted, the content is stored in
the corresponding folders in Tones & Images
from where you can select and play/view
the contents.
38
Accessing Multimedia Content
11 CUSTOMIZING YOUR PHONE
4. Press
down to select the next key that you
Accessing the main menu
wish to map and repeat step 3.
You can access the main menu in different
ways depending on how you configure your
phone settings.
Tip: If you wish to make the icons for the
mapped navigation keys visible or invisible on
the home screen, highlight On Idle Screen and
select Visible or Invisible.
Using shortcuts
From the home screen, you can access shortcuts
5. When you have completed mapping all the
by pressing
in four different directions.
keys, press
to select Preview. You
can now see the new appearance of the
home screen.
Four shortcuts are automatically programmed
into your phone (up, down, left, and right).
6. Press
to return to the mapping menu
to
Press
Press
Press
Press
up
Access Calls
and make further changes or press
choose Select and save the new settings.
down
left
Access Phonebook
Access Tones and Images
Access My Movistar
Setting your menu style
You can choose from a list or icon view of the
main menu items.
right
1. Select Menu → My Movistar → Menu Style.
Mapping your main keys
2. Highlight Grid or List view and press
.
You can associate each of the four navigation keys
with a main menu item of your choice for
immediate access.
Setting sounds for your phone
Your phone is set to make sounds when you
receive calls, press keys, navigate through menus,
and receive alerts (such as new messages). You
can set the phone to a different mode such as
vibrate when you receive calls and alerts.
1. Select Menu → My Movistar → Main Keys.
2. Highlight the key you wish to map.
3. Press
to the right or left to scroll through
the list of menu options until the menu option
you wish to assign to the key is displayed.
1. Select Menu → My Movistar → Sounds.
User Guide for the Kyocera K352 Phone
39
2. Press
options:
to select from the following
4. Press
to select a ringer.
Setting the roam ringer
–
–
–
–
–
Type select different ringers for the listed
functions in the phone.
Volume set the volume for the listed
functions in the phone.
Alerts set alerts and reminders for tasks,
messages, missed calls etc.
Key Length select the duration of the
key press.
Information read a description of
these options.
You can set a ringer to indicate when an incoming
call will be subject to roaming charges.
Select Menu → My Movistar → Sounds →
Type → Calls → Roam → Enable.
The phone now emits a distinctive roam ring to
indicate when you are roaming during calls.
Setting roaming alert
You can set the phone to warn you before you
answer or place a call while roaming.
Select Menu → My Movistar → Sounds →
Choosing ringers
Alerts → Roaming → Enable.
Your K352 has several preset ringers you can
choose to use for incoming calls.
Assigning a ringer to a group
1. Select Menu → My Movistar → Sounds →
You can assign a ringer to a group. All contacts in
the group list will have the same ringer.
Type.
2. Press
to select Call. You can
1. Select Menu → Phonebook → Contacts →
Groups.
choose from:
–
–
–
–
Ringer Type sets a ringer for all
incoming calls.
2. Select a group from the list and press
to
select Options → Ringer.
Your choices are:
Business sets a common ringer for all
contacts listed in the Business Group.
Personal sets a common ringer for all
contacts listed in the Personal Group.
Roam allows you to enable or disable a
unique ringer for calls that may be subject
to roaming charges.
–
–
–
Fix Ring pre-set ringers
Dwnld Ring downloaded ringers
MP3 your MP3 songs
3. Select the ringer type you wish to use and
press
.
4. Select a ringer from the list and press
3. Scroll down the list to hear the different rings.
to save.
40
Customizing Your Phone
3. Highlight the Enable or Disable option and
press to select it.
Adjusting volume
You can adjust the voice and ringer volume as
well as key tones.
Personalizing the screen
Note: The Information option describes the
function of this menu.
Adjusting voice volume
You can adjust voice volume manually during a
call. Press
then press
on the left side of the phone,
left or right to adjust the volume.
Changing your banner
The banner is the personal label for your phone.
It appears on the home screen above the time and
date. The banner can be up to 14 characters long.
Adjusting key pad volume
You can change the volume of the tones the phone
makes when you press the keys.
1. Select Menu → My Movistar → Display →
1. Select Menu → My Movistar → Sounds →
Banner.
Volume → Keypad.
2. Enter your banner text.
2. Press
left or right to adjust the volume.
3. Press
to select Save and Exit.
Adjusting the ringer volume
Selecting a wallpaper
1. Select Menu → My Movistar → Sounds →
Wallpaper appears on the home screen.
Volume → Calls.
1. Select Menu → My Movistar → Display →
Wallpaper.
2. Press
right to increase the volume, or left
to decrease the volume.
2. Press
to select
3. Press
to select and save.
–
Consistent → Edit for a single wallpaper,
- or -
Setting message alerts
You can choose how you want to be alerted of
incoming voicemail, or text messages.
–
Change Daily → Edit to select a different
wallpaper for each day of the week.
1. Select Menu → My Movistar → Sounds →
3. Select either
Alerts.
–
–
Fix Wallppr for pre-loaded wallpapers, or
Dwnld Wallpr for your downloaded
2. Select the type of alert: Minute Beep,
Roaming, Connect, Disconnect, Signal Fade,
Messages, Voicemail, MsdCall Alrt, On/Off.
wallpapers.
User Guide for the Kyocera K352 Phone
41
4. Highlight a wallpaper and press
to
2. Select an option from the list:
view it.
–
10 Sec., 30 Sec., or 1 Min., the
duration backlighting remains on after
your last keypress.
Note: You can press
a different wallpaper.
go back and select
–
Always On keeps backlighting on all
the time.
5. Press
to save the selected wallpaper,
or to select which day of the week to display
the wallpaper.
Note: These settings drain the battery more
quickly and reduce talk and standby times.
Selecting a screen saver
Note: Power backlighting may not be available
with the optional desktop charger or other
accessories.
Screen savers appear on the home screen and are
activated one minute after the last keypress.
Incoming calls and alerts override screen savers.
Note: The battery charges more slowly when
power backlighting is on.
1. Select Menu → My Movistar → Display →
Screen Saver.
2. Select an option and press
to view it.
Changing the display contrast
3. Press to save the selected screen saver.
1. Select Menu → My Movistar → Display →
Contrast.
Selecting a color theme
2. Press
left or right to adjust the contrast.
1. Select Menu → My Movistar → Display →
3. Press
to select OK.
Themes.
2. Select an option and press
.
Setting numbers to auto-hyphenate
Auto-hyphenation, when enabled, automatically
inserts hyphens into your phone numbers to be
consistent with the U.S. dialing plan.
Adjusting the backlight
Your screen lights up while you are in a call or
when you press a key on the keypad. However,
you can set the duration that the backlight
remains on.
For example, (121) 234-5555.
•
Select Menu → My Movistar → Display →
Auto-Hyphen → Enable.
1. Select Menu → My Movistar → Display →
Backlight.
42
Customizing Your Phone
Choosing a different language
Your phone may display alternative languages.
1. Select Menu → My Movistar → Language.
Locking the keypad
You can lock the keypad of your phone to prevent
dialing numbers when the keys are pressed
unintentionally.
2. Select a language, and press
.
1. Select Menu → My Movistar → Key Guard
2. Select from the following options and press
Silencing all sounds
to activate it:
You can silence all sounds and set the phone
to vibrate or light up when you receive calls
and alerts.
–
–
Guard Now locks the keypad immediately.
30 sec auto, 1min auto, 5min auto the
duration of time from the last keypress
after which the keypad will be locked.
Disabled unlocks the keypad.
Setting the phone to vibrate or
light up
–
1. Select Menu → My Movistar → Silent Mode.
2. Choose an option and press
Tip: To use the phone when keyguard is working,
press and hold to unlock the phone.
:
–
–
–
–
Vibrate Only the phone vibrates for
the duration of the incoming call or
other alert.
Vibe then Ring the phone vibrates first and
then rings for the remainder of the
incoming call alert.
Lights Only the phone lights up for
the duration of the incoming call or
other alert.
Ring the phone rings for the incoming call
or alert (returns to a non-silent mode).
Voice Dial
For more information on this feature, see
“Creating a voice tag” on page 44.
User Guide for the Kyocera K352 Phone
43
12 USING VOICE RECOGNITION
Voice recognition allows you to make calls
by speaking commands into the phone’s
microphone. Your K352 can store 20 voice
dial tags.
Adding a voice tag to an existing
contact
1. Select Menu → Phonebook → Contacts →
Search.
Note: You cannot use voice recognition to end a
2. Select Name, Number or Group search and
call; you must press
.
enter your search criteria to locate a contact.
3. Highlight the contact’s name and press
.
Setting up voice dialing
To make calls using voice dialing, contacts must
be saved with associated voice tags.
4. Press
to select Options.
5. Press
down to highlight Add Voice and
then press
.
Creating a voice tag
6. Follow the voice prompts to record a name for
the contact.
1. Select Menu → My Movistar → Voice Dial →
Add V Dial.
Viewing entries with voice tags
Note: Select Menu → My Movistar →
Voice Dial → Information to read a
description of this feature.
To view a list of all contacts with assigned
voice tags:
•
Select Menu → My Movistar → Voice Dial →
V Dial List.
2. Follow the voice prompts to record a name for
the contact.
3. Input the contact’s phone number and then go
Editing or deleting a voice tag
to step 5.
- or -
1. Select Menu → My Movistar → Voice Dial →
V Dial List.
Press
to select Search to input an
2. Highlight the voice tag you want to edit, and
existing contact from the Phonebook.
press
to select Options.
4. Press
5. Press
to select the phone number.
3. Select an option:
to select OK.
–
–
–
Dial to dial the selected number.
6. Select OK again to save the voice tag to the
Play to listen to the voice tag.
Edit Voice Dial allows you to change the
recorded voice tag.
selected number.
44
Using Voice Recognition
–
Edit Number allows you to change
the number.
Erase erases the recorded voice tag.
Erase All erases ALL the recorded voice
tags in the Voice Dial List.
2. Press
your memo.
Note: You can press
to select Start and begin speaking
–
–
to Pause and then
press
3. Press
4. Press
again to Continue recording.
to Stop recording.
4. Follow the prompts.
to Save when finished.
Note: You can choose to press
Cancel recording.
to
Calling using voice tags
1. If you haven’t already done so, record a voice
5. Rename the record and press
to select
tag for the person you wish to call.
Option → Save and Exit.
Note: Voice memos saved without names are
identified by numbered records.
2. Select Menu → My Movistar → Voice Dial →
Voice Dial.
- or -
Press
once from the home screen.
Playing and editing voice memos
3. Follow the voice prompts.
1. Select Menu → Tones & Images → Tones →
Voice Memo.
Note: If the phone finds multiple voice tags
that sound like the name you said, you will be
asked to verify which name you want to call.
- or -
Select Menu → Utilities → Voice Memo →
Recorded Memos.
4. When you are finished with the call,
2. Highlight the voice memo you want to hear
press
.
and press
.
Using voice memos
3. Select an option:
The voice memos tool allows you to record and
play back audio notes. Your phone can store 10
voice memos.
–
–
Play to review your voice memo.
Rename to change the name of the voice
memo.
–
–
–
Erase to erase the selected voice memo.
Erase All to erase all voice memos.
Details to view the date and duration of the
voice memo.
Recording a voice memo
1. Press and hold the record key
located
between the phone screen and the keypad.
- or -
Select Menu → Utilities → Voice Memo →
Record New.
4. Follow the prompts and then press
to
select OK.
User Guide for the Kyocera K352 Phone
45
13 UTILITIES
The Utilities menu on your phone provides tools
to help you schedule events, organize your time,
perform basic calculations and record notes.
–
–
Enter a date for the event in the Edit Date
field. Use
to move through the fields.
Press
to select OK.
7. Press
to select Save All.
Calendar
The calendar allows you to schedule events and
set reminder alerts.
Viewing or erasing an event
1. Select Menu → Utilities → Calendar.
2. Highlight a date and press
.
Creating an event
3. Highlight an event and press
to select
1. Select Menu → Utilities → Calendar.
Options:
2. Press
to select a date and press
.
–
–
–
–
View to view the event details.
Add to add a new event.
Erase to erase the selected event.
Erase All to erase all events for the
selected date.
3. Press
to select Options → Add.
4. To enter an event description:
–
–
–
Press
Edit Item.
to select Options →
Enter a name for the event in the Content
field. For help entering text, see page 14.
Press
4. Follow the prompts.
to select OK.
Alarm Clock
Use the Alarm Clock to set an alert for a specific
time. The alert occurs only if the phone is on.
5. To enter an event time:
–
–
–
Press
Edit Time.
to select Options →
1. Select Menu → Utilities →
Alarm Clock → Time.
Enter a time for the event in the Enter Time
field. Use
Press
to move through the fields.
to select OK.
2. Enter the time of day you want the alarm to
sound and press
.
6. To alter the date:
3. Select Period and press
to select:
–
Press
Edit Date.
to select Options →
–
Once the alarm sounds when the
scheduled time occurs next.
46
Utilities
–
–
–
Daily the alarm sounds every day at the
scheduled time.
Mon – Fri the alarm sounds every week day
at the scheduled time.
Sat – Sun the alarm sounds on weekends
at the scheduled time.
Stopwatch
1. Select Menu → Utilities → Stopwatch.
2. Press
to select Start to begin counting.
3. Press
to select Pause to stop counting
and Resume to continue counting.
–
Press
to select Reset to clear the
4. Select On and press
to set the alarm.
counter.
Note: When the alarm sounds, press
silence the alarm.
to
–
Press
to select Back and return to
the previous screen.
Calculator
Timer
Use the calculator to perform basic arithmetic.
1. Select Menu → Utilities → Calculator.
2. Use the keypad to enter numbers.
The timer counts down for a specified amount
of time. It beeps when that amount of time
has elapsed.
3. Press
to select mathematical operations
1. Select Menu → Utilities → Timer.
as displayed on the screen.
2. Press
to select Set.
4. Press
to calculate the result.
3. Use the keypad to enter the time.
Example: Enter 5, press
enter 2, then press
left once to select X,
to obtain the result of 10.
4. Press
to begin the countdown.
–
Press
to select Cancel to clear the
5. Press
to erase entries or return to the
timer.
previous screen.
–
Press
to select Back and return to
the previous screen.
Voice Memo
The voice memo tool allows you to record and
play back audio notes. Your phone can store 10
voice memos. For information, see “Using voice
memos” on page 45.
User Guide for the Kyocera K352 Phone
47
14 CONFIGURING YOUR PHONE
Ensuring call privacy
Managing network settings
You can set your phone to sound an alert if
enhanced CDMA voice privacy is lost or regained.
Check with your service provider to see if CDMA
voice privacy is enabled in your area.
Setting the phone to receive data
or faxes
Your phone may be able to receive certain data or
faxes, depending on the system sending the
information. You cannot receive voice calls while
the phone is in data/fax mode. To receive data or
faxes, you must connect the phone to a laptop or
PC and switch the phone from voice mode to
data/fax mode.
1. Select Menu → Settings → Network →
Set Network → Voice Priv → Enable.
Switching between phone lines
Your phone can have two service accounts, or
phone lines, associated with it. Each phone line
has its own phone number.
Note: To purchase a cable visit
When you are using one line, you cannot make or
receive calls on the other. It’s like the phone is
“off” for that number. Your voicemail, however,
still takes messages. All contacts and settings are
shared for both lines.
1. Connect the phone to the laptop or PC.
2. Select Menu → Settings → Network →
Set Network → Data/Fax.
3. Highlight an option and press
to
Note: You must first establish a second phone
line with your service provider. Once established,
a second phone number becomes available in the
menu for selection:
select it:
–
–
Voice only allows only voice calls.
Fax, once or Data, once sets the phone to
fax mode or data mode for one time.
Fax, until off or Data, until off forces the
phone into fax mode or data mode until
the phone is turned off.
1. Select Menu → Settings → Network →
–
Set NAM.
2. Select one of the two lines and press
.
Note: You cannot receive voice calls while the
phone is in data/fax mode.
48
Configuring Your Phone
Unlocking the phone
Viewing your internet user ID
1. From the home screen, press
to select
You can view your internet user ID and password
at the following location:
Unlock.
2. Enter your four-digit lock code.
Menu → Settings → Network → Net User ID.
Restricting calls
Creating a secure environment
You can restrict the calls that can be made from
your phone to emergency numbers, your
contacts, and service provider numbers.
This section describes all the features involved in
securing your phone and preventing access to
personal information. All security features are
shielded by a four-digit lock code.
1. Select Menu → Settings → Security.
2. Enter your four-digit lock code.
3. Select Limit Calls.
Changing your lock code
The default lock code is typically 0000 or the last
4 digits of your phone number.
4. Choose an option:
–
Received limits incoming calls only.
Outgoing calls can still be sent.
Sent limits outgoing calls only. Incoming
calls can still be received.
1. Select Menu → Settings → Security.
2. Enter your four-digit lock code.
3. Select New Lck Code.
–
4. Enter the existing lock code.
5. Select:
5. Enter a new four-digit code and press
.
–
–
Enable to activate the call restriction, or
Disable to remove the call restriction
6. Enter your new lock code again and
press
.
Designating important numbers
Locking your phone
The important numbers feature allows you to
specify three personal phone numbers that can be
called when the phone is locked.
When your phone is locked, you can call only
emergency numbers or your service provider
number. You can still receive incoming calls.
1. Select Menu → Settings → Security.
2. Enter your four-digit lock code.
3. Select Important #.
1. Select Menu → Settings → Security.
2. Enter your four-digit lock code.
3. Select Lock Phone → Enable.
User Guide for the Kyocera K352 Phone
49
4. Highlight important number 1, 2, or 3 nd
press to select the slot.
WAP Settings
Setting a Web connection prompt
5. Enter the phone number, including the area
You can set an alert to be notified with a WAP
connection warning message, “Do you want to
connect to WAP?”.
code. Do not enter 1 before the area code.
6. Press
two times to select OK and save.
Important: To make a call to an emergency
number from a locked phone, you must dial the
number (including area code) exactly as it was
stored in Important Numbers.
1. Select Menu → Settings → WAP Settings →
Web Prompt.
Your options are:
–
–
–
–
Off if you do not wish to be notified of web
activation.
At Start to be notified at the beginning of a
WAP session.
At End to be notified at the end of a WAP
session.
Both to be notified both at the beginning
and end of a WAP session.
Erasing all contacts
You can erase all entries from your Contacts
directory.
1. Select Menu → Settings → Security.
2. Enter your four-digit lock code.
3. Select Erase Contacts and press
message appears: “Erase All Contacts?”.
4. Press to select OK.
Note: You can press
without erasing contacts.
. A
Setting a Web session timer
to exit this screen
You can set a session timer alert while you browse
the internet.
1. Select Menu → Settings → WAP Settings →
Call and message settings
Session Timer.
•
See “Customizing call settings” on page 12 for
details on configuring incoming and outgoing
call settings on your phone.
Choose to be alerted every 60, 90, 120 or
150 seconds.
•
See “Customizing message settings” on
page 24 for details on configuring message
settings on your phone.
50
Configuring Your Phone
Setting the date and time format
You can set the way the date and time are
displayed on your phone.
1. Select Menu → Settings → Date/Time.
2. To set the date format:
–
–
Select Date Format.
Highlight mm/dd/yyyy or dd/mm/yyyy and
press
.
3. To set the time format:
–
–
Select Time Format.
Highlight 12–hour or 24–hour and
press
.
Resetting the phone
•
To reset the phone and clear all data stored in
flash, select Menu → Settings →
Orig Setting → Master Clear.
User Guide for the Kyocera K352 Phone
51
15 GETTING HELP
Customer support
Argentina:
Australia:
Brazil:
0-800-666-0052
1-800-507-000
0-800-55-2362
800-43-1212
Your service provider’s customer support
department is accessible directly from your
phone. They can answer questions about your
phone, phone bill, call coverage area, and
specific features available to you, such as call
forwarding or voicemail.
Chile:
Colombia:
India:
01-800-700-1546
Toll free:1-600-121214
Toll: 0124-284-5000
For customer support select:
•
Menu → Help → Cust Care Center.
For roaming call center numbers select:
Menu → Help → Int’l Roam.
Mexico:
001-866-650-5103
New Zealand: 0-800-990-100
•
Panama:
Peru:
001-800-201-1984
0-800-51-934
–
–
In Venezuela
In USA
For questions about the phone features, refer to
the materials provided with your phone, or visit
Puerto Rico:
Venezuela:
1-866-664-6443
0-800-100-2640
Before requesting support, please try to
reproduce and isolate the problem. When you
contact the Customer Care Center, be ready to
provide the following information:
For additional questions, you may contact the
Kyocera Wireless Corp. Customer Care Center in
any of the following ways:
•
•
•
Web site: www.kyocera-wireless.com
•
•
The name of your service provider.
Email: [email protected]
The actual error message or problem
you are experiencing.
Phone: 1-800-349-4478 (U.S. and Canada)
or 1-858-882-1401. Customer support
phone numbers are also available in the
following countries.
•
The steps you took to reproduce the problem.
52
Getting Help
•
The phone’s electronic serial number (ESN).
To locate the ESN:
–
Select Menu → Help → Phone Info
and scroll down to ESN: for the
11-digit number.
Qualified service
If the problem with your phone persists, return
the phone with all accessories and packaging to
the dealer for qualified service.
Phone accessories
To shop for K352 phone-accessories,
You may also call us at 1-800-349-4188
(U.S.A. only) or 1-858-882-1410.
Become a product evaluator
To participate in the testing and evaluation of
Kyocera Wireless Corp. products, including
cellular or PCS phones, visit
beta.kyocera-wireless.com.
User Guide for the Kyocera K352 Phone
53
16 USING THE CAMERA
–
Memory Status to display the number of
pictures taken (maximum is 100).
Tips for using your camera
•
You cannot activate the camera while on an
active call or while browsing files in the
Camera Photos folder.
Setting up the camera for photos
1. Select Menu → Camera → Settings
2. Choose a setting option and press
•
•
Once the camera is active, the home screen
acts as the viewfinder.
to
select it.
If you get a “Low memory” error, check
your resolution and quality compression
settings. See “Setting up the camera for
photos” on this page.
–
–
–
Resolution options are 160 x 120, 320 x
240 and 640 x 480.
Low Light Mode brightens the picture for
low light environments.
Timer options are Off (default), 3, 5, or
10 second pauses. When set, the timer
is displayed.
Multishot allows you to take multiple
pictures (up to 6) while the camera key is
pressed and held. A tone will play each
time a picture is taken. A second tone will
play when the final picture is taken. You
can enable or disable this feature.
White Balance options are Automatic,
Incandescent, Florescent or Daylight.
Color Tone options are Normal, Black &
White, Negative, and Sepia.
•
•
•
All photos are automatically saved in the
Camera Photos folder.
You can rename a photo.
See step 2 on page 55.
–
Your phone only produces images in
JPEG format.
Camera Options
The following options are available in the Camera
menu when you select Menu → Camera:
–
–
–
Capture to take a picture. See “Taking a
picture” on page 55.
–
Settings to set options for taking pictures.
See “Setting up the camera for photos” on
this page.
–
–
Quality options are Low, Medium and High
Viewfinder options are Actual or
Full Screen.
–
–
Camera Pictures to view saved pictures.
Last Picture to view the last picture taken.
54
Using the Camera
–
–
Shutter Sound sets the sound used when
the camera takes a picture.
Frame allows you to add a frame. A frame
cannot be removed once it has been used
in a picture.
Note: The picture resolution changes
to160 x 120 while taking pictures with
frames. The resolution returns to the
original setting once Frame is disabled.
Accessing saved camera pictures
1. You can access the Camera Pictures folder in
two ways.
Select Menu → Tones & Images →
Images → Camera Photos.
- or -
Select Menu → Camera → Camera Pictures.
2. Highlight the picture you want to view and
press
to select an option.
–
–
–
–
–
View the selected picture.
Rename the picture.
Erase the current picture.
Erase All pictures.
Details view the settings used when the
picture was taken.
Take Picture take another picture.
Taking a picture
1. Press
on the right side of the phone.
- or -
Select Menu → Camera → Capture
Tip: Press up or down to zoom in or
zoom out. (You cannot zoom when the
resolution is set to 640*480.)
–
2. Focus on the image using the phone screen.
3. Press
- or -
or
to take the picture.
Press
to select Capture.
Note: The pictures are automatically saved in
the Camera Pictures folder.
4. Press
to Send or Erase the picture.
5. Press
to select Back. The camera
returns to taking the next picture.
6. Press
twice to return to the Camera
menu when you have finished taking pictures.
User Guide for the Kyocera K352 Phone
55
INDEX
A
options, 9
recent, 10
redialing, 8
restriction, 13
timing, 12
volume, 8
online games, 37
erasing
accessing songs, 35
accessories, 53
alarm clock, 3, 46
alerts
for messages, 41
auto text, 23
auto-hyphenation, 42
contact entries, 50
text messages, 25
F
fax mode, 48
camera
H
accessing pictures, 55
options, 54
setting up, 55
settings, 54
hands-free headset
purchasing, 53
B
banner, 41
basic functions, 7
battery, 1
charging, 1, 2
blocking outgoing calls, 49
I
taking a picture, 55
checking memory, 32
color theme, 42
contacts directory, 17
contrast, 42
icons, 3
insert mode, 25
L
language, 43
lights
lights-only mode, 3, 43
limiting calls out, 49
locking
C
calculator, 47
call counters, 12
call settings, 12
answer mode, 13
auto redial, 13
call restriction, 13
timing, 12
D
data/fax setup, 48
display contrast, 42
downloaded applications
disabling, 31
keypad, 43
phone, 49
opening, 31
removing, 31
viewing, 31
M
Call waiting
using, 9
main menu
contents, 6
downloading, 30
an application, 30
options, 31
call waiting
setting, 12
mapping, 39
shortcuts, 39
style, 39
calls
answering, 8
conference, 9
conference calls, 9
forwarding, 9
ignoring, 8
memory, saving, 25
multimedia messages
receiving, 27
music player
music files, 35
settings, 36
songs, 35
E
emergency
calls, 11
emergency mode, 11
exit emergency mode, 12
entertainment
making, 8
missed, 9
56
troubleshooting, 36
roam alert, 40
roam ringer, 40
screen saver, 42
sounds, 39
stopwatch, 47
timer, 47
N
voice memos, 47
number mode, 14
V
P
wallpaper, 41
vibrate, 3, 43
voice dialing, 44
voice memos
playing, 45
recording, 45
voice tags
phone numbers
editing, 19
verifying your own, 7
phone, unlocking, 49
setting call forwarding, 12
shortcuts, 39
signature, 24
silent mode, 3, 43
light up, 43
R
receiving
vibrate, 43
creating, 44
deleting, 44
editing, 44
using, 45
calls, 8
songs
multimedia messages, 27
text messages, 22
recent calls
calling, 10
playing, 35
putting onto phone, 35
sounds
voicemail, 11
setting up, 7
volume
setting, 39
erasing, 10
icons, 10
options, 10
viewing, 10
ringers
assigning to groups, 40
choosing types, 40
silencing, 7
volume, 41
roaming, 3
setting roam alert, 40
setting roam ringer, 40
speed dialing, 10
symbol mode, 14
key beep, 41
ringer, 41
W
T
wallpaper, 41
WAP browser, 33
menu options, 33
technical support, 52
text entry, 14
quick reference, 16
text messages, 21
creating, 21
S
erasing, 25
reading, 22
retrieving, 22
settings, 24
saved phone numbers
editing, 19
screen contrast, 42
screen icons, 3, 14
screen saver, 42
security, 49
locking keypad, 43
sent messages, 23
setting
U
unlocking the phone, 49
utilities
alarm clock, 46
calculator, 47
calendar, 46
color theme, 42
User Guide for the Kyocera K352 Phone
57
|