Special
Order
Products
GW-LE8
Selective Call Audio Module for Open Voice Systems
Use with:
C-ML/A, LEM-1DL/C, LEF, LAF-C, or LDF Masters
- INSTRUCTIONS -
The GW-LE8 is an audio module, used with other components to make up a selective calling audio
door station. Panels from two to eight stations can be created. The entrance panel can selectively call
and communicate with open voice inside master stations. Use any of the above listed master stations.
8 Call Entrance Station
*MODULAR ENTRANCE STATIONS
List of components for each entrance panel:
2 Call Panel
3 Call Panel
4 Call Panel
1
1
1
1
GW-LE8
GW-DP
GW-2P
GW-2
1
1
1
1
GW-LE8
GW-DP
GW-3P
GW-2
1
1
1
1
GW-LE8
GW-DP
GW-4P
GW-2
GW-LE8
w/ GW-DP
5 Call Panel
6 Call Panel
7 Call Panel
1
1
1
1
1
GW-LE8
GW-DP
GW-1P
GW-4P
GW-3
1
1
1
1
1
GW-LE8
GW-DP
GW-2P
GW-4P
GW-3
1
1
1
1
1
GW-LE8
GW-DP
GW-3P
GW-4P
GW-3
GW-3
GW-4P
(x2)
8 Call Panel
1
1
2
1
GW-LE8
GW-DP
GW-4P
GW-3
COMPONENT MODELS AND DESCRIPTIONS
Model
Description
GW-LE8
GW-DP
GW-1P
GW-2P
GW-3P
GW-4P
GW-2
Audio Module
Audio Module Front Panel
1 Button Panel
2 Button Panel
3 Button Panel
4 Button Panel
2 Panel Back Box
3 Panel Back Box
GW-LE8 Terminal Definitions:
D+
D-
Common communication
Negative, common call signal
Yel
Blu
Common Call signal
(8 wires) Selective Call-in and
GW-3
communication wires (1 per button)
SEMI-FLUSH AND SURFACE MOUNTING BOXES:
Model Description
GW-002H Semi-flush Mt. Hood for GW-2
GW-002HB Surface Mt. Hood for GW-2
GW-003H Semi-flush Mt. Hood for GW-3
GW-003HB Surface Mt. Hood for GW-3
Pg. 1
WIRING DIAGRAM:
GW-LE8 WITH GW-4P, USING LEM-1DL/C MASTER STATIONS
GW-LE8
LEM-1DL/C
LEM-1DL/C
LEM-1DL/C
LEM-1DL/C
E
-
+
D+
D-
E
-
+
R
1
E
-
+
E
-
+
R
~
~
~
~
~
~
~
~
GW-4P
1
Yel
Blu
Blu
Blu
Install jumper
between D+/D-
PT-1210N
PT-1210N
PT-1210N
PT-1210N
R
R
2
3
4
1
1
Blu
Blu
Blu
Blu
Blu
1
EL
EL
EL
EL
EL
EL
EL
EL
~
~
NOTES:
AC Power
1. Only components of the entrance panel that include wire
connections are shown here.
Door Strike
2. For complete wiring information, please see the LEM-1DL/C
instructions.
WIRING DIAGRAM:
GW-LE8 WITH GW-4P & GW-2P, USING LEF-5 MASTER STATIONS
LEF-5 #1
LEF-5 #2
LEF-5 #3
LEF-5 #4
LEF-5 #5
LEF-5 #6
GW-LE8
Remove D+/D-
jumper on all
masters.
E
-
+
R
1
E
-
+
R
E
-
+
R
E
-
+
R
E
-
+
R
E
-
+
R
D+
D-
-
+
GW-4P
Yel
Blu
Blu
Blu
Blu
PS-12C
1
2
3
4
1
1
1
GW-2P
1
1
Blu
2
1
Blu
Blu
Blu
K1
L
K1
L
K1
L
K1
L
K1
L
K1
L
Yel
Blk
RY-PA
~
~
AC Power
Door Strike
NOTES:
1. In this example, the door station rings in on station #1 of each master station.
It can be wired to any unused station number.
2. Only components of the entrance panel that include wire connections are shown here.
3. For complete wiring information, please see the standard LEF instructions.
If additional master stations are to be installed in each office/suite, wire them per the standard instructions.
Pg. 3
Pg. 4
MOUNTING:
1. Cut appropriate sized mounting hole into wall.
2. Assemble and mount entrance panel
GW-2
GW-3
1. Open a hole in the back box to pass cable through.
2. Mount the GW-LE8 to the GW-DP using the supplied screws.
3. Mount the components to the GW-2 or GW-3 frame.
4. Mount the frame to the back box.
4-1/2"
4-1/2"
5. Replace the two mounting screw covers.
8-1/8"
11-3/4"
Standard flush mount installation:
Flush mount installation with weather hood:
GW-3
(Frame)
GW-3
(Frame)
GW-003H
(Weather hood)
GW-DP +
GW-LE8
(GW-LE8 mounts to GW-DP
with supplied screws)
GW-DP +
GW-LE8
(GW-LE8 mounts to GW-DP
with supplied screws)
GW-3
(Box)
GW-3
(Box)
GW-4P
(Call switch panel)
GW-4P
(Call switch panel)
Surface mount installation with weather hood:
Filling in resident names:
GW-3
(Frame)
GW-003HB
(Weather hood)
1. Remove protective cover using opener.
(Opener included with GW-2 and GW-3 frames)
Protective Cover
GW-DP +
GW-LE8
(GW-LE8 mounts to GW-DP
with supplied screws)
Opener
GW-4P
(Call switch panel)
Pg. 5
OPERATION:
1. The entry station has multiple call buttons with an associated directory card. Press the button of the
person you wish to call.
2. The master station(s) will ring an electronic call tone as long as the call button on the entrance station
is being held. (A chime will be heard when using the C-ML/A room stations.)
3. With CM-L/A and LEM-1DL/C Master Stations: Press TALK button to answer the call.
With LEF Master Stations: Select the station button with the lit LED to answer. If the LED has gone out
(stays on for approx. 20 seconds), press the selector button assigned to the entry station.
4. At the inside station, press the TALK button to talk, and release to listen. The person at the entrance
station speaks hands free.
5. When finished with the call, press the OFF button on the master station.
6. NOTE: If the "Occupied" lamp is on, the system is in use. Wait until the LED goes out, or determine if
a master station has been left on unintentionally.
SPECIFICATIONS:
Power Source:
Provided from master station.
C-ML/A: 1 SKK-620 or 4 "C" batteries per master.
LEM-1DL/C: 1 PT-1210N per master.
LEF: 1 PS-12C per system.
Impedance:
Communication:
Calling:
20 ohms
Hands free at entry station. Push-to-talk at master station.
C-ML/A: 4-Stroke chime
LEM-1DL/C: Momentary call tone
LEF: Momentary call tone and LED, remaining lit for approx. 20 seconds
C-ML/A: 2 conductors homerun per station to entrance panel.
LEM-1DL/C: 2 conductors homerun per station to entrance panel.
LEF: 4 common (E, R, +, -) plus 1 individual per sub, looped; or 5 conductors homerun
to each master. Shielded cable is recommended.
Use Aiphone #822202 (2 conductor) or 822212 (12 conductor) for max. 8 station wiring.
Wiring:
Door Release Wiring: 2 conductors looped through stations to strike and strike power supply.
Wiring Distance:
C-ML/A: 245' with 22AWG; 590' with 18AWG.
LEF/LEM: 650' with 22AWG; 1,600' with 18AWG.
NOTE:
Only information concerning the GW-LE8 is shown here.
For complete wiring information, please see the appropriate system instructions.
TOLL FREE TECHNICAL SUPPORT:
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
(425) 455-0510
(800) 692-0200
TOLL FREE FAX LINE:
Pg. 6
(800) 832-3765
GW-LE8 Instr.
1001bkjd
E-MAIL: [email protected]
FAX (425) 455-0071
|