DISTORTION MODELER DM100
Thank you for showing your confidence in us by purchasing the BEHRINGER
DISTORTION MODELER DM100. This high-quality modeling effects pedal provides electric
guitars with state-of-the-art distortion sounds of the most legendary pedals. It features
a mode switch that lets you choose between these renowned distortion simulations
and achieve the right tone for any situation.
1. CONTROLS
Top view
Use the MODE switch to chose between the three different distortion simulations.
DS1 provides a hard distortion that reproduces the subtle nuances of your playing
dynamics. With D+ you can achieve everything from retro-style soft-clipped distortion
to classic fuzzy tones. RAT delivers fat smooth distortion with a whole lot of
sustain and cut-through power.
The DIST(ortion) control adjusts the amount of distortion effect.
The TONE control allows you to shape your overall sound.
The LEVEL control adjusts the output level.
The ON/BATT LED illuminates when the effect is activated. It also serves as a
battery level indicator.
Use the footswitch to activate/deactivate the effect.
Use this 1/4" TS IN connector to plug in the instrument cable.
The 1/4" TS OUT connector sends the signal to your amp.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or
replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be
careful not to scratch the unit.
|